Xerox DocuColor Server Release Notes - page 2

Page 2

Clear server

If the DocuColor hangs after the Clear Server command is executed, power cycle the 

DocuColor and choose the Clear Server command again.

Suspend/Resume Printing

When you need to interrupt print jobs to make copies, wait until the DocuColor is not 

printing (the print icon is 

not

 displayed on the LCD) and use the Suspend Printing and 

Resume Printing commands on the Control Panel. The Interrupt Job key on the copier is 

for interrupting copy jobs only.

Laptop computers

With certain models of laptop computers (for example, IBM ThinkPad), you should always 

disconnect the parallel port cable before shutting down the computer.

Manual feed printing

Make sure that you load the correct page size for manual feed printing. If you specify 

Manual Feed for the page source, the document will be printed on the pages you load even 

if they are not the size specified in the document.

Manual feed tray printing

Although the DocuColor supports transparency printing (from the bypass tray), in order to 

print from that tray you must select manual feed in the Print dialog box.

LPR printing

When sending multiple jobs with the LPR command from SGI workstations and possibly 

other client workstations as well, the jobs may be combined into a single LPR transfer. In 

this case only the first job in the transfer block prints—the others do not print.

SMB printing

If an Invalid Handle message is reported with SMB printing it means that the job timed 

out. This is most likely to occur when printing to the Direct connection, which accepts 

only one job at a time, but may also occur when printing to the Print queue if multiple 

connections to the DocuColor are active.

If both the Ethernet and Token Ring ports are enabled, SMB broadcasts only on the 

Ethernet segment. To allow for SMB broadcasting on the Token Ring segment, you must 

disable the Ethernet 

port

 (not just the Ethernet IP address) in Setup (see the 

Administrator 

Guide

).

Postcard paper size

When printing jobs for which a Postcard paper size is specified with an Adobe printer driver 

from Macintosh or Windows computers, the job may print as Letter instead of Postcard. If 

this occurs with a Macintosh computer, open the System Folder>Preferences folder and 

delete the folder named Printer Prefs. If it occurs on a Windows computer, delete and then 

reinstall the Adobe printer driver as described in the README file for the driver (on the 

User Software CD).