Xerox DocuMate 3220 User Manual - page 33
Xerox
®
DocuMate
®
3220 Scanner
Maintenance
24
User Guide
Hardware Properties
You can use the scanner’s properties page to keep track of scanner maintenance, change some of
the hardware options, configure the scanner interface behavior, and adjust application options
that may be available for your scanner.
To open the scanner hardware properties page:
•
Windows 7
or later—from the Windows Control Panel, open
Hardware and Sound
and then
Devices and Printers
.
Right-click on the scanner and then select
Scan properties
from the list. Click
Yes
if you are
prompted by the Windows User Account Control to confirm that you want make changes to
the system settings.
•
Windows Vista
—from the Windows Control Panel, open
Hardware and Sound
and then
Scanners and Cameras
.
Click on the scanner icon then click on the
Properties
button. Click
Yes
if you are prompted by
the Windows User Account Control to confirm that you want make changes to the system
settings.
•
Windows XP
—from the Windows Control Panel when in category view, open
Printers and
Other Hardware
and then
Scanners and Cameras
.
Right-click on the scanner and then select
Properties
from the list.
Device Settings
The Device Settings tab shows the hardware information for your scanner. The options on the
Device Settings tab will be available based on whether or not the scanner hardware supports the
feature. Some features described herein may not be available for the current scanner. Please
disregard any information about features that you do not see in the interface for your scanner.
Scanner Details
•
Firmware version
—this is the scanner’s hardware processor version number.
•
Serial number
—the scanner’s unique identification number.