Xerox DocuMate 3220 User Manual - page 43
Xerox DocuMate 3220
User’s Guide
43
6.
Select a scanning configuration in the
Select configuration
list.
The configuration’s basic settings include: scanning mode, resolution (dpi), page size, brightness
(Br), and contrast (Cr). To see a selected scan configuration’s settings, click its icon. Click the icon
again to close the detailed information. Refer to
Scan Configurations
on page 47 and
Configure
Before Scan
on page 60 for instructions on creating and modifying scan configurations.
7.
Click on
OK
to save the changes.
8.
Place an item in the scanner and click the One Touch button to start scanning.
The scanner scans and sends the image to the selected destination, with the file format and scan
configuration you specified.
Properties button
—Displays a window for selecting properties for a destination. This button is
disabled if the selected destination application does not have global configuration properties.
Refresh button
—Updates the links between all your computer’s Destination Applications and
One Touch. If you install new software that can be used as a Destination Application, click the
Refresh
button to link the new software to One Touch.
New/Copy/Edit/Delete buttons
—Click
New
or
Copy
to add new scan configurations to the list. Click
Edit
or
Delete
to change or remove them.
OK/Cancel/Apply buttons
—
OK
accepts any changes and closes the window.
Apply
accepts any
changes but leaves the window open so you can continue making additional changes.
Cancel
closes
the window without accepting any changes.