Xerox DocuMate 3640 User Manual - page 12
Xerox
®
DocuMate
®
3640
User’s Guide
12
Electrical Information
Warning - Electrical Safety Information
1.
The power receptacle for the machine must meet the requirements stated on the data plate on
the rear of the machine. If you are not sure that your electrical supply meets the requirements,
please consult your local power company or an electrician for advice.
2.
The socket outlet shall be installed near the equipment and shall be easily accessible.
3.
Use the power cable that is supplied with your machine. Do not use an extension cord or remove
or modify the power cord plug.
4.
Plug the power cable directly into a correctly grounded electrical outlet. If you are not sure
whether or not an outlet is correctly grounded, consult an electrician.
5.
Do not use an adapter to connect any Xerox equipment to an electrical outlet that lacks a ground
connection terminal.
6.
Do not place this equipment where people might step or trip on the power cable.
7.
Do not place objects on the power cable.
8.
Do not override or disable electrical or mechanical interlock devices.
9.
Do not push objects into slots or openings on the machine. Electrical shock or fire may result.
Electrical Supply
•
This product shall be operated from the type of electrical supply indicted on the product’s data
plate label. If you are not sure that your electrical supply meets the requirements, please consult
your local power company for advice.
•
Always connect equipment to a correctly grounded power outlet. If in doubt, have the outlet
checked by a qualified electrician.
WARNING: This equipment must be connected to a protective earth circuit.
This equipment is supplied with a plug that has a protective earth pin. This plug will only fit into an earthed electrical
outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace
the outlet.