Xerox DocuMate 742 User Manual - page 42
User’s Guide
2-15
DocuMate 742
Scanning From One Touch
To set Configure Before Scan:
1. Open the One Touch Properties window.
2. Select the scan configuration
Configure Before Scan
.
3. Right-click on
Configure Before Scan
and choose an interface to use for configuring before
scanning.
TWAIN
—The TWAIN Interface opens for you to make changes prior to scanning. See
“Scanning from TWAIN” on page 1.
WIA
—The Windows Image Acquisition (WIA) Interface opens for you to make changes
prior to scanning. See “Scanning from WIA” on page 1.
4. Click
OK
or
Apply
on the One Touch Properties window.
To Scan Using Configure Before Scan
1. Click the button you set up to use Configure Before Scan.
2. The TWAIN Interface opens.
3. Choose your scan settings, such as the Picture Type of Color, Grayscale or Black & White,
Resolution in DPI, and Page Size.
4. Click the
Scan
button on the TWAIN Interface.
Select then right-click
on
Configure Before
Scan
to get the menu,
and choose the
interface to use for
scanning.