DL manuals
Xerox
Printer
Document Centre 240 DC
Tips And Tricks Manual

Xerox Document Centre 240 DC Tips And Tricks Manual

Other manuals for Document Centre 240 DC: User Manual

Manual is about: Xerox Document Centre User's Guide

Page of 12

Download

Print this page

Bookmark us

dc00cc0135

Document Centre Technical Support Operations

Page 1

Xerox DC 265/255/240 and

490/480/470/460 Macintosh

Driver Information

Purpose

This document includes information about the following topics related to Xerox’s custom

Macintosh drivers:

• The causes of the Macintosh custom driver Xjector plugin error and solutions. The error

is fixed in CentreWare 5.2 version 5.02.11 driver but it can occur in previous versions.

• Macintosh custom driver and PPD interoperability information to help you make the best

driver choice for your Document Centre and environment.

• How to access the custom driver in applications with different Xerox PPDs so that you

can use Document Centre printing features.

This document is an updated to address ESS versions for the DC 265/255/240 above 5.03

as well as the new DC 490/480/470/460 products (490/460), CentreWare 4.1 SP2, 5.1, 5.2

and 5.3. For information regarding ESS version 5.03 and/or CentreWare 4.1SP1 or earlier,

refer to DC Tip Mac Issues for the DC 220/230 ST/LP.

NOTE: The information in this document applies to Mac OS 7.x-9.x. It does not address or

apply to Mac OS X.

Section I - Xjector plugin Errors

Issue

When you attempt to print, Xjector plugin errors can occur when installing the

DC 265/255/240 custom driver version 5.01.18, or Adobe 8.6/LaserWriter 8.6 drivers (which

installs 8.6 PrintingLib) on Macintosh OS 8.5 or 8.6. You can receive error messages like

those in the following list. These messages do not indicate a catastrophic error.

• “The DXTN “DC 240/265-Xjector” reports: Error 101 occurred in xuiJobGetInitialValues.”

• “The DXTN “Xerox Features” reports: An error –5751 has occurred 04840001.”

• “The DXTN “Watermark” reports: An error –5751 has occurred 04840007.”

• “The DXTN “Xerox Features” reports: An error 101 occurred in xuiJobGetInitialValues.”

… for the user

Xerox Document Centre

DC00CC0135

September 19, 2002

This document

applies to these

Xerox

products:

DC 555/545/535

x DC 490/480/470/460 ST

DC 440/432/425/420 ST

DC 340/332 ST

x DC 265/255/240 ST/LP

DC 230/220 ST/LP

DCCS 50

1 2 3 4 5 6 7 Next › »

Summary of Document Centre 240 DC

Page 1
Dc00cc0135 document centre technical support operations page 1 xerox dc 265/255/240 and 490/480/470/460 macintosh driver information purpose this document includes information about the following topics related to xerox’s custom macintosh drivers: • the causes of the macintosh custom driver xjector ...
Page 2
Dc99cc0135 page 2 document centre technical support operations cause when a version prior to 8.6 of the adobe driver is used with an os containing version 8.6 or higher of the apple printinglib file, errors occur. The dc 265/255/240 custom macintosh driver is based on the adobe 8.5.1 printer driver....
Page 3
Dc00cc0135 document centre technical support operations page 3 section ii - printinglib errors issue the following error might occur when the dc 265/255/240 custom driver is selected in the chooser: “sorry, the dc 265/255/240 driver is not available.” after this error occurs, the xerox driver cannot...
Page 4
Dc99cc0135 page 4 document centre technical support operations section iii - printer driver and ppd interoperability os environments/custom drivers/generic ppds the table below lists the macintosh os environments, custom drivers, and custom ppds. This table is based on versions from centreware 5.2. ...
Page 5
Dc00cc0135 document centre technical support operations page 5 generic ppds when you print from the macintosh to a dc 265/255/240 or dc 490/460, we recommend that you use the xerox dc 265/255/240 or dc 490/460 drivers in combination with the custom ppds. If you use the laserwriter or adobe postscrip...
Page 6
Dc99cc0135 page 6 document centre technical support operations printing features the following table lists the features available in generic and custom ppds. The features listed under the custom ppds are only available when used with the custom driver. Select the ppd based on the desired printing fe...
Page 7
Dc00cc0135 document centre technical support operations page 7 docutech emulation the docutech ppd offers the same features as its partner, either the custom or generic dc ppd. The docutech ppd emulates the output of a docutech, specifically the resolution, margins and halftones. This feature is typ...
Page 8: And Quarkxpress
Dc99cc0135 page 8 document centre technical support operations section iv - driver accessibility through pagemaker 6.5 and quarkxpress accessing the custom driver through pagemaker do the following steps to access the dc 265/255/240 or 490/460 custom macintosh driver interface in macintosh pagemaker...
Page 9
Dc00cc0135 document centre technical support operations page 9 driver accessibility with quarkxpress accessing the custom macintosh driver use the following steps to access the dc 265/255/240 or 490/460 custom macintosh driver interface with custom ppds. Follow the procedure that corresponds with yo...
Page 10: Other Issues and Solutions
Dc99cc0135 page 10 document centre technical support operations quarkxpress 4.X 1. Select [file: page setup]. 2. For printer description select the generic ppd for your document centre. 3. By default, the paper size is set to custom. Ensure that the paper size is set to the desired size. If not, the...
Page 11: Additional Information
Dc00cc0135 document centre technical support operations page 11 additional information xerox's document centre technical support operations welcomes feedback on all dc tips documentation - send feedback via e-mail to: usa.Dssc.Doc.Feedback@mc.Usa.Xerox.Com . Other dc tips are available at the follow...
Page 12
Dc99cc0135 page 12 document centre technical support operations.