Xerox Document Centre 240 LP Quick Install Manual
Page 1
Microsoft Windows (NetBEUI) Peer-to-Peer Networks Quick Install Card
Xerox Document Centre 240/255/265 LP/ST
b)
On the keypad enter
1111
or the
current password. Press the
Enter
button when finished. If your printer is
an ST model press the
Go to Tools
button, otherwise skip to the next step.
c)
The Touch Screen will be used for the
remainder of the data entry.
3.
Enable Microsoft Network printing.
a)
Press the
Connectivity and Network
Setup
button.
b)
At the next screen, press the
Network
Setup
button.
4.
Enable the Protocol and Media.
a)
At the next screen, press the
Microsoft Networking
button.
b)
At the next screen, press the
Transport and Media
button.
c)
At the next screen, press the
Enable
button to enable the Microsoft Network
protocols.
d)
Once enabled the Physical Media
portion of the screen will appear. Press
the corresponding button to select one
of the following
NetBEUI or Ethernet
,
NetBEUI/Token Ring
. After making
your selection press
Save
.
5.
Assign the Workgroup and Host Names
a)
You will be returned to the previous
screen, press the
Workgroup and
Host
button.
b)
At the next screen, press the
Workgroup Name
button. Using the
Touch Screen keys, enter the name of
the workgroup in which you want the
printer to appear then press
Save
.
c)
You will be returned to the previous
screen. Press the
SMB Host Name
button. Using the touch panel keys,
enter the desired text for this item then
press
Save
.
d)
OPTIONAL STEP: Press the
SMB
Host Description
button, enter the
desired text then press
Save
. You will
be returned to the previous screen.
e)
Press
Save
again to return to the
previous screen.
6.
Assign a Printer Name and Description
a)
Press the
Printer Description
button.
b)
Press the
Printer Name
button, using
the touch panel keys, enter the
desired text for this item then press
Save
. Press
Save
again to return to
the previous screen.
Before You Start
If your printer is equipped with a Token Ring
interface, use the
Token Ring Quick Install
Card
supplied in this Quick Install Card set to
set the Ring Speed and Source Routing settings
for your environment.
.
Record the following information:
Network Interface Type ___________________
Workgroup Name _______________________
SMB Host Name ________________________
Printer Name ___________________________
OPTIONAL INFORMATION:
SMB Host Description ____________________
Printer Description _______________________
Go to the printer and...
1.
Connect your Document Centre to the net-
work with the appropriate cabling.
2.
Enter the
Tools
pathway
a)
Press the
Access
( )
button.
For assistance, contact your local Xerox Customer Support Center:
USA: 1-800-821-2797 Canada: 1-800-939-3769