Xerox Document Centre DC 535 Reference Manual
dc02cc0304
Document Centre Technical Support Operations
Page 1
PDL Reference Guide for the
DC 555/545/535
Accessing Extended Features
Overview
This document enables you to access the extended features of the Document Centre in
environments that do not have a custom driver. This includes the following environments:
•
Custom DOS packages
•
Other platforms (including mainframes and minis)
NOTE:
Some of the commands and syntax used in this document requires some familiarity
with either PostScript (PS) or Printer Command Language (PCL).
This document provides the Printer Description Language (PDL) commands and syntax for
each feature. The following items are also included:
•
A table that describes features supported by the Document Centre.
•
A PostScript table that describes the PostScript features the Document Centre supports
and the syntax to use the feature.
•
A PCL table that describes the PCL features the Document Centre supports and the
syntax to use the feature.
This document is not intended to be a complete PS or PCL reference manual; it is a guide
for using the PS and PCL commands with the Document Centre.
Refer to these additional reference materials
PostScript Language Reference Manual
, Third
Edition, ISBN 0-201-37922-8 and
PCL 5 Printer Language Technical Reference Manual
,
Hewlett-Packard Manual Part Number 5021-0377.
Using this Guide
1. Search the Feature Table to determine whether the feature you wish to use is
supported.
2. Verify that the feature is supported by the platform. For example, the Document Centre
must have the Finisher option installed to use stapling commands.
3. Follow across the table to find the syntax listed for the PDL examples shown. Read the
Dependencies/Caveats section.
Xerox Document Centre
… for the user
dc02cc0304
September 20, 2002
Extended Features:
•
Accounting
•
Proof
•
Staple
•
Collation
•
Duplex
•
Cover
Options
•
Media
Source,
Type, and Color
•
Media
Size
•
Quantity
•
Delay
This document
pertains to these
Xerox
products:
x
DC 555/545/535
DC 490/480/470/460
ST
DC 420/425/432/440
ST
DC 332/340 ST
DC 240/255/265
ST/LP
DC 220/230 ST/LP
DCCS 50