Xerox DocuPrint 203A User Manual

Manual is about: Xerox Printers User's guide

Page of 99

Download

Print this page

Bookmark us

DocuPrint 203A

User's Guide

You must set up the hardware and install the driver before you can use the printer.

Please use the Quick Setup Guide to set up the printer. You can find a printed copy in the box.

Please read this User’s Guide thoroughly before you use the printer. Keep the CD-ROM in a

convenient place so you can use it quickly if you need to.

Please visit our web site at http://www.fxprinters.com where you can get the latest Driver Updates.

1 2 3 4 5 6 7 Next › »

Summary of DocuPrint 203A

Page 1
Docuprint 203a user's guide you must set up the hardware and install the driver before you can use the printer. Please use the quick setup guide to set up the printer. You can find a printed copy in the box. Please read this user’s guide thoroughly before you use the printer. Keep the cd-rom in a co...
Page 2
Apple, the apple logo, and macintosh are trademarks of apple computer, inc., registered in the u.S. And other countries. Epson is a registered trademark and fx-850 is a trademark of seiko epson corporation. Hewlett packard is a registered trademark and hp laserjet 6p, 6l, 5p, 5l, 4, 4l, 4p, iii, iii...
Page 3: Table of Contents
Iii table of contents 1 before using the machine .........................................................................................1-1 preface .............................................................................................................................................. 1-1 usi...
Page 4
Iv control panel button (go button) ....................................................................................................... 4-7 print a test page .......................................................................................................................... 4-8 using contr...
Page 5: Before Using The Machine
1 1 - 1 1 before using the machine preface thank you for selecting the fuji xerox docuprint 203a. This guide provides all the necessary print operating procedures, maintenance information like how to clear paper jams, daily care, setting various items, and precautions. This guide assumes that the op...
Page 6: Using This Guide
Before using the machine 1 - 2 1 using this guide this section describes the organization of this guide. Guides supplied we provide the following guides for optimum usage of the machine. Included manuals the following manuals are included with this product. They are referred to as accompanying manua...
Page 7: Conventions
Before using the machine 1 - 3 1 conventions • in this document, “computer” refers to a personal computer or workstation. • the following indications are used in this guide: notes tell you how you should respond to a situation that may arise or give tips about how the current operation works with ot...
Page 8: Safety Notes
Before using the machine 1 - 4 1 safety notes read these safety notes carefully before using this product to make sure you operate the equipment safely. Your fuji xerox product and recommended supplies have been designed and tested to meet strict safety requirements. These include safety agency appr...
Page 9
Before using the machine 1 - 5 1 do not place the machine in a hot, humid, dusty, or poorly ventilated environment. Prolonged exposure to these adverse conditions can cause fire or electric shocks. The machine has ventilation holes on both sides. Ensure that the machine is installed with a minimum c...
Page 10: For Power & Earth Connection
Before using the machine 1 - 6 1 for power & earth connection two power specifications are listed below. The specifications that apply to your machine depend on your machine configuration. Connect the power plug only to a properly rated power outlet. Otherwise, it can cause fire or electric shocks. ...
Page 11: For Machine Operation
Before using the machine 1 - 7 1 when unplugging the machine, grasp the plug instead of the cord. Forcibly pulling on a cord can damage it and cause fire or electric shocks. Be sure to switch off and unplug the machine before accessing the interior of the machine for cleaning, maintenance, or fault ...
Page 12
Before using the machine 1 - 8 1 do not play this cd-rom using an incompatible cd-rom player. Playing at high volume levels can cause hearing damage and speaker failure. This equipment is certified as a class 1 laser product under [iec60825]. This means that the machine does not emit hazardous laser...
Page 13: For Consumables
Before using the machine 1 - 9 1 for consumables never throw a toner cartridge into an open flame. Toner remaining in the cartridge can cause an explosion and you can get burnt. Never use a vacuum cleaner when you clean spilled toner. It can cause explosion as the toner fills the vacuum cleaner and ...
Page 14
Before using the machine 1 - 10 1 attached in countries where it is needed. This printer has a class 3b laser diode which produces invisible laser radiation in the scanner unit. You should not open the scanner unit under any circumstances. ) caution:use of controls or adjustments or performance of p...
Page 15: 2 Sided Feature
Before using the machine 1 - 11 1 the objectives of the international energy star program to protect the global environment and conserve energy resources, the international energy star program encourages the following product features. Fuji xerox confirms docuprint 203a satisfies the requirements fo...
Page 16: Illegal Copies and Printouts
Before using the machine 1 - 12 1 illegal copies and printouts copying or printing certain documents may be illegal in your country. Penalties of fines or imprisonment may be imposed on those found guilty. The following are examples of items that may be illegal to copy or print in your country. Curr...
Page 17: About This Printer
2 2 - 1 2 about this printer what is in the box? When you unpack the printer, check that you have all of the following parts. 1 printer 2 drum unit and toner cartridge assembly 3 quick setup guide 4 cd-rom 5 ac power cord parts may vary from one country to another. Note • the ac power cord may be sl...
Page 18: Interface Cable
About this printer 2 - 2 2 interface cable the interface cable is not a standard accessory. Please purchase the appropriate interface cable for the interface you intend to use (usb or parallel). Usb cable do not use a usb interface cable that is longer than 2.0 meters. Do not connect the usb cable t...
Page 19: Front View
About this printer 2 - 3 2 front view 1 face-down output tray support flap (support flap) 2 control panel 3 manual feed slot 4 manual feed paper guides 5 paper tray 6 power switch 7 front cover 8 face-down output tray back view 1 back cover 2 ac power connector 3 parallel interface connector 4 side ...
Page 20: Positioning The Printer
About this printer 2 - 4 2 positioning the printer please read the following before you use the printer. Power supply use the printer within the recommended power range. Power source: 110 v model: ac 100 to 120 v, 50/60 hz 220 v model: ac 220 to 240 v, 50/60 hz the power cord, including extensions, ...
Page 21: Type And Size of Paper
About this printer 2 - 5 2 what kind of paper can i use? Type and size of paper the printer loads paper from the installed paper tray, or the manual feed slot. The names for the paper trays in the print driver and this guide are as follows: while looking at this page on the cd-rom, you can jump to t...
Page 22: Recommended Paper
About this printer 2 - 6 2 recommended paper before you buy a lot of paper, please test a small quantity to make sure that the paper is suitable. Use paper that is made for plain-paper copying. Use paper that is 80 to 90 g/m 2 . Use neutral paper. Do not use acidic or alkaline paper. Use long-grain ...
Page 23: Printable Area
About this printer 2 - 7 2 printable area the edges of the paper that cannot be printed on are shown below. Portrait landscape a4 letter legal b5 (iso) executive a5 a6 b6 1 4.23 mm 4.23 mm 4.23 mm 4.23 mm 4.23 mm 4.23 mm 4.23 mm 4.23 mm 2 6.01 mm 6.35 mm 6.35 mm 6.01 mm 6.35 mm 6.01 mm 6.01 mm 6.01 ...
Page 24: Printing Methods
About this printer 2 - 8 2 printing methods printing on plain paper, bond paper and transparencies you can print on plain paper, bond paper or transparencies from the paper tray or manual feed slot. For the paper you want to use, see what kind of paper can i use? On page 2-5. Printing on plain paper...
Page 25
About this printer 2 - 9 2 3 while pressing the blue paper-guide release lever, slide the paper guides to fit the paper size. Check that the guides are firmly in the slots. 4 put paper in the tray. 5 check that the paper is below the maximum paper mark (). Note • paper jams may occur if you put more...
Page 26
About this printer 2 - 10 2 7 lift up the support flap to prevent paper from sliding off the face-down output tray. Note if you choose not to lift up the output tray support flap, we recommend that you remove printed pages immediately after they come out of the printer. 8 send the print data to the ...
Page 27
About this printer 2 - 11 2 printing on plain paper, bond paper or transparencies from the manual feed slot note the printer automatically turns on the manual feed mode when you put paper in the manual feed slot. 1 select the paper size, paper type, paper source and other settings in the print drive...
Page 28
About this printer 2 - 12 2 3 lift up the support flap to prevent paper from sliding off the face-down output tray. Note if you choose not to lift up the output tray support flap, we recommend that you remove printed pages as soon as they come out of the printer. 4 using both hands, slide the manual...
Page 29
About this printer 2 - 13 2 6 after the printed page comes out of the printer, put in the next sheet of paper or the transparency as in step 5 above. Repeat for each page that you want to print. Note if you print on transparencies, remove each transparency immediately after printing. Stacking the pr...
Page 30
About this printer 2 - 14 2 printing on heavyweight paper, labels and envelopes note the printer automatically turns on the manual feed mode when you put paper in the manual feed slot. When you select the paper you want to use, see what kind of paper can i use? On page 2-5. If you print on envelopes...
Page 31
About this printer 2 - 15 2 2 send the print data to the printer. Note a no paper manual feed status is shown by the control panel leds until you put a sheet of paper or an envelope in the manual feed slot. 3 lift up the support flap to prevent paper from sliding off the face-down output tray. Note ...
Page 32
About this printer 2 - 16 2 5 using both hands, put one piece of paper or one envelope in the manual feed slot until the front edge of the paper or envelope touches the paper feed roller. When you feel the machine pull in the paper, let go. Note • put the paper into the manual feed slot with the sid...
Page 33
About this printer 2 - 17 2 types of envelopes to avoid do not use envelopes: that are damaged, curled, wrinkled, or unusual shape that are extremely shiny or textured with clasps, snaps or tie strings with self-adhesive closures that are of a baggy construction that are not sharply creased that are...
Page 34: 2 Sided Printing
About this printer 2 - 18 2 2 sided printing the supplied print drivers for windows ® 95/98/me, windows nt ® 4.0 and windows ® 2000/xp all allow 2 sided printing. For more information about how to choose the settings, see the help text in the print driver. Guidelines for printing on both sides of th...
Page 35
About this printer 2 - 19 2 4 the printer will now automatically print all the odd-numbered pages on the other side of the paper. Note when you put paper in the paper tray, first empty the tray then put the printed pages in the tray, with the printed side face up. (do not add the printed pages to th...
Page 36
About this printer 2 - 20 2 paper orientation for 2 sided printing the printer prints the second page first. If you print 10 pages on 5 sheets of paper, it will print page 2 then page 1 on the first sheet of paper. It will print page 4 then page 3 on the second sheet of paper. It will print page 6 t...
Page 37: Driver
3 3 - 1 3 driver print driver a print driver is software that translates data from the format used by a computer to the format that a particular printer needs. Typically, this format is a printer command language or page description language. The print drivers for the following version of windows ® ...
Page 38
Driver 3 - 2 3 you can change the following printer settings when you print from your computer. Paper size page layout image orientation copies paper type paper source resolution toner save mode 2 sided print *1 watermark *1 store job *1 quick print setup *1 sleep timer *1 status monitor *1 administ...
Page 39: For Windows
Driver 3 - 3 3 for windows ® features in the print driver you can download the latest print driver or get other information by accessing the our company’s web site at http://www.Fxprinters.Com you can also change settings by clicking the illustration on the left side of the basic tab in the properti...
Page 40
Driver 3 - 4 3 advanced tab note if you are using windows ® 2000 or xp, you can access the advanced tab by clicking printing preferences... In the general tab of the printer properties screen. If you are using windows nt ® 4.0, you can access the advanced tab by clicking document defaults in the fil...
Page 41
Driver 3 - 5 3 toner save mode you can save running costs by turning on the toner save mode, which reduces the print density. Print settings you can manually change the print settings. • auto selecting the auto button will allow automatic printing with the most suitable print settings for your print...
Page 42
Driver 3 - 6 3 printer features you can set the following printer features in this tab: (you can jump to the pages for the printer features by clicking the feature names in the list below.) • store job • quick print setup • sleep timer • status monitor • administrator (for windows® 95/98/me users on...
Page 43
Driver 3 - 7 3 store job the printer saves data that you want to reprint. You can reprint a document without sending the data again from your pc. To reprint press and hold down the go button for about 4 seconds until all the leds light up in order (toner, drum, paper, ready). Note • reprint function...
Page 44
Driver 3 - 8 3 enter the password into this box. • set password click here to change the password. • copy lock lock the copy pages selection to prevent multiple copy printing. • lock watermark lock the current settings of the watermark option to prevent changes being made. • lock zoom lock the zoom ...
Page 45
Driver 3 - 9 3 density adjustment increase or decrease the print density. Print error message you can choose whether the printer reports problem by printing error page or not. About the errors, see error message printout on page 6-3. Selections are printer default (on), on and off..
Page 46
Driver 3 - 10 3 paper tray attributes tab paper source settings this feature recognizes the paper size in each paper tray..
Page 47
Driver 3 - 11 3 support tab note if you are using windows ® 2000 or xp, you can access the support tab by clicking printing preferences... In the general tab of the printer properties screen. If you are using windows nt ® 4.0, you can access the support tab by clicking document defaults... In the fi...
Page 48: For Macintosh
Driver 3 - 12 3 for macintosh ® this printer supports mac os ® 9.1 to 9.2 and mac os ® x 10.2.4 or greater. You can download the latest print driver by accessing the our company’s web site at http://www.Fxprinters.Com note the screens on your macintosh ® will vary depending on your operating system....
Page 49
Driver 3 - 13 3 print settings set the resolution, paper type, toner save and other settings. You can change settings by selecting the setting in the print settings list: print mode paper type toner save mode print mode you can change the resolution as follows: • 300 dpi • 600 dpi • hq 1200 paper ty...
Page 50
Driver 3 - 14 3 uninstalling the print driver you can uninstall the print driver that you installed with the following steps. Note • this instruction is not available if you installed the print driver from windows add printer function. • after uninstalling, we recommend that you restart your pc to r...
Page 51
Driver 3 - 15 3 fx laser driver for macintosh ® for mac os ® 9.1 to 9.2 1 open the extensions folder located in the system folder on the macintosh hd. 2 drag all these following files in the extensions folder to the trash. • br_printmonitor(laser) • dp203a_204a • dp203a_204a(ip) 3 restart the macint...
Page 52: Control Panel
4 4 - 1 4 control panel this section refers to the four light emitting diodes (leds) (toner, drum, paper, ready) and a control panel button (go) on the control panel. The led indications shown in the table below are used in the illustrations in this chapter. Note when the power switch is off, all th...
Page 53
Control panel 4 - 2 4 led printer status power-off the power switch is off. Sleep mode the printer is in sleep mode. Pressing the go button wakes up the printer from sleep mode to ready mode. Ready to print the printer is ready to print. Warming up the printer is warming up. Receiving data the print...
Page 54
Control panel 4 - 3 4 toner low indicates that the toner cartridge is nearly empty. Purchase a new toner cartridge and have it ready for when toner empty is indicated. The toner led alternates turning on for 2 seconds and off for 3 seconds. Toner empty replace the toner cartridge with a new one. See...
Page 55
Control panel 4 - 4 4 front cover open close the front cover of the printer. Back cover open close the back cover of the printer. Paper jam clear the paper jam. See paper jams and how to clear them on page 6-5. If the printer does not start printing, press the go button. No paper manual feed put the...
Page 56: Service Call Indications
Control panel 4 - 5 4 service call indications if there is an error that cannot be cleared by the user, the printer will show that a service call is needed by lighting up all the leds as shown below. If you see the service call indication above, turn off the power switch, wait a few seconds, and the...
Page 57
Control panel 4 - 6 4 table 1: led indications while pressing go button make a note of the indication and report the error status to your dealer or our customer support centre. Note make sure that the front cover is fully closed before you report a service call. * 1 if this error occurs, turn the po...
Page 58
Control panel 4 - 7 4 control panel button (go button) the control panel button has the following functions: wake-up if the printer is in sleep mode, press the go button to wake the printer up and go to the ready state. Error recovery if there is an error, the printer will recover automatically from...
Page 59: Print A Test Page
Control panel 4 - 8 4 print a test page you can use the go button or the print driver to print a test page. Using control panel button 1 turn off the printer. 2 make sure that the front cover is closed and the power cord is plugged in. 3 hold down the go button as you turn on the power switch. Keep ...
Page 60
Control panel 4 - 9 4 print a printer settings page you can print the current settings using the control panel button or print driver. Using the control panel button 1 make sure that the front cover is closed and the power cord is plugged in. 2 turn on the printer and wait until the printer is in th...
Page 61: Routine Maintenance
5 5 - 1 5 routine maintenance you will need to replace certain parts and clean the printer regularly. Replacing the consumable items you will need to replace the consumable items regularly. Note these instructions are also included in improving the print quality on page 6-10. Consumables caution whe...
Page 62: Toner Cartridge
Routine maintenance 5 - 2 5 toner cartridge the life of the original toner cartridge that came with the printer may be either a starter *1 or standard *2 toner cartridge, and depends on the model and country you bought the printer in. *1 the starter toner cartridge will print up to 1,500 a4 or lette...
Page 63
Routine maintenance 5 - 3 5 toner empty message if the led shows the message below, the printer has run out of toner or the toner is not evenly distributed inside the cartridge. Replacing the toner cartridge note • to ensure high quality printing, make sure you use quality toner cartridges. When you...
Page 64
Routine maintenance 5 - 4 5 3 push down the blue lock lever and take the toner cartridge out of the drum unit. Caution note • be sure to seal up the toner cartridge tightly in a bag so that toner powder does not spill out of the cartridge. • discard the used toner cartridge according to local regula...
Page 65
Routine maintenance 5 - 5 5 5 pull off the protective cover. Important • wait to unpack the toner cartridge until immediately before you put it in the printer. If toner cartridges are left unpacked for a long time the toner life will be shortened. • if an unpacked drum unit is put in direct sunlight...
Page 66
Routine maintenance 5 - 6 5 6 put the new toner cartridge firmly into the drum unit until you hear it lock into place. If you put it in properly, the lock lever will lift automatically. 7 clean the primary corona wire inside the drum unit by gently sliding the blue tab from right to left and left to...
Page 67: Drum Unit
Routine maintenance 5 - 7 5 drum unit this printer can print up to 12,000 pages * with one drum unit. * at 5% print coverage (a4 or letter size). The actual number of printed pages will vary depending on the average type of print job and paper. Note • there are many factors that determine the actual...
Page 68
Routine maintenance 5 - 8 5 replacing the drum unit note we recommend that you clean the printer when you replace the drum unit. See cleaning on page 5-11. Follow these steps to replace the drum unit. 1 make sure that the printer is turned on and the drum led is blinking. Open the front cover of the...
Page 69
Routine maintenance 5 - 9 5 4 push down the blue lock lever and take the toner cartridge out of the drum unit. Note • be sure to seal up the drum unit tightly in a bag so that toner powder does not spill out of the unit. • discard the used drum unit according to local regulations, keeping it separat...
Page 70
Routine maintenance 5 - 10 5 7 put the drum unit and toner cartridge assembly in the printer. 8 close the front cover. 9 make sure that the drum led is now off. Important when installing the assembly, hold its grip..
Page 71: Cleaning
Routine maintenance 5 - 11 5 cleaning clean the outside and inside of the printer regularly with a dry, lint-free cloth. When you replace the toner cartridge or the drum unit, make sure you clean the inside of the printer. If printed pages are stained with toner, clean the inside of the printer with...
Page 72
Routine maintenance 5 - 12 5 3 wipe the outside of the printer with a soft cloth to remove dust. 4 remove anything that is stuck inside the paper tray. 5 wipe the inside of the paper tray with a soft cloth to remove dust. 6 put the paper tray firmly back in the printer. 7 plug the printer back in an...
Page 73
Routine maintenance 5 - 13 5 2 open the front cover of the printer. 3 pull out the drum unit and toner cartridge assembly. Caution after you have just used the printer, some parts inside the printer are extremely hot. Wait for the printer to cool down before you touch the internal parts of the print...
Page 74: Cleaning The Corona Wire
Routine maintenance 5 - 14 5 4 wipe the scanner window with a dry, lint-free cloth. 5 put the drum unit and toner cartridge assembly back in the printer. 6 close the front cover. 7 plug the printer back in and turn on the printer power switch. Cleaning the corona wire if you are experiencing print q...
Page 75
Routine maintenance 5 - 15 5 3 clean the primary corona wire inside the drum unit by gently sliding the blue tab from right to left and left to right several times. Return the tab to the home position () before you put the drum unit back in the printer. If you do not, printed pages may have a vertic...
Page 76: Troubleshooting
6 6 - 1 6 troubleshooting you can correct most problems by yourself. If you need additional help, contact our customer support centre or your dealer. Identifying your problem first, check the following: the ac power cord is connected properly and the printer is turned on. All of the protective parts...
Page 77
Troubleshooting 6 - 2 6 error messages in the status monitor the status monitor will report problems with the printer. Take the corrective actions listed in the following table for the error message that the status monitor reports. The default setting for the status monitor is off. If you would like...
Page 78: Error Message Printout
Troubleshooting 6 - 3 6 error message printout the printer will report problems by printing an error message as defined in the following table. Take the corrective actions for the error message. Error message action memory full press the go button to print the data left in the printer. Cancel the pr...
Page 79: Paper Handling
Troubleshooting 6 - 4 6 paper handling first, make sure that you are using paper that meets recommended paper specifications. See what kind of paper can i use? On page 2-5. Problem recommendation the printer does not feed paper. If there is paper in the paper tray, make sure it is straight. If the p...
Page 80
Troubleshooting 6 - 5 6 paper jams and how to clear them if a paper jam occurs, the printer will tell you by flashing the paper led as shown below. Caution clear the jammed paper as follows. If the jammed paper is removed completely by following the steps below, you can install the paper tray first,...
Page 81
Troubleshooting 6 - 6 6 2 pull the jammed paper up and out of the printer. 3 open the front cover. 4 pull out the drum unit and toner cartridge assembly slowly. The jammed paper will be pulled out with the drum unit and toner cartridge assembly. Important to prevent damage to the printer caused by s...
Page 82
Troubleshooting 6 - 7 6 5 open the back cover. 6 pull the tab toward you to open the rear chute cover. 7 pull the jammed paper out of the fuser unit. If the jammed paper cannot be pulled out easily, push down the tab with one hand as you gently pull the paper out with other. Rear chute cover.
Page 83
Troubleshooting 6 - 8 6 8 close the back cover. 9 push the lock lever down and take the toner cartridge out of the drum unit. Take out the jammed paper if there is any inside the drum unit. 10 put the toner cartridge back into the drum unit until you hear it lock into place. If you put it in properl...
Page 84
Troubleshooting 6 - 9 6 11 put the drum unit and toner cartridge assembly back in the printer. 12 put the paper tray firmly back in the printer. 13 close the front cover. 14 make sure that the paper led is now off and the printer is ready..
Page 85: Other Problems
Troubleshooting 6 - 10 6 other problems for macintosh ® with usb improving the print quality if you have a print quality problem, print a test page first (see page 4-8). If the printout looks good, the problem is probably not the printer. Check the interface cable or try the printer on another pc. T...
Page 86: A B C D
Troubleshooting 6 - 11 6 gray background make sure that you use paper that meets the recommended specifications. See what kind of paper can i use? In chapter 2. Check the printer’s environment - high temperatures and high humidity can increase the amount of background shading. See positioning the pr...
Page 87
Troubleshooting 6 - 12 6 white spots on black text and graphics at 75 mm intervals black spots at 75 mm intervals if the problem is not solved after printing a few pages, the drum unit may have glue from label stock on the opc drum surface. Clean the drum unit as follows: 1 position the print sample...
Page 88: A B C D
Troubleshooting 6 - 13 6 black toner marks across the page the drum unit may be damaged. Put in a new drum unit. See page 6-12. Make sure that you use paper that meets our specifications. See what kind of paper can i use? On page 2-5. • if you use label sheets for laser printers, the glue from the s...
Page 89: Abcd
Troubleshooting 6 - 14 6 white lines down the page wipe the scanner window with a soft cloth. See cleaning the inside of the printer on page 5-12. The toner cartridge may be damaged. Put in a new toner cartridge. See replacing the toner cartridge on page 5-3. Page skewed make sure the paper or other...
Page 90: Solving Print Problems
Troubleshooting 6 - 15 6 solving print problems problem recommendation the printer prints unexpectedly or it prints garbage data. Make sure the printer cable is not too long. We recommend you use a parallel or usb cable that is less than 2 meters (6.5 feet) in length. Make sure that the printer cabl...
Page 91: Appendix
A a - 1 a appendix printer specifications engine controller *1 from paper tray *2 usb is not supported under windows ® 95 or windows nt ® 4.0. Technology electrophotographic print speed up to 20 ppm (a4 size) first print time less than 10 sec *1 resolution windows ® 95/98/me windows nt ® 4.0 windows...
Page 92
Appendix a - 2 a software control panel paper handling *3 instructional animations for problem solving *4 calculated with 80 g/m 2 paper print driver gdi driver for windows ® 95/98/me, windows nt ® 4.0, windows ® 2000/xp fx laser driver for mac os ® 9.1 to 9.2 and mac os ® x 10.2.4 or greater utilit...
Page 93
Appendix a - 3 a paper specifications supplies dimensions / weights *5 up to 10 sheets *6 legal paper is not available in some regions. *7 depends on the model and country you bought the printer in. Paper types manual feed slot plain paper, heavyweight paper, lightweight paper, bond paper, recycled ...
Page 94
Appendix a - 4 a other system requirements *8 usb is not supported under windows ® 95 or windows nt ® 4.0. *9 power macintosh with an apple original pre-installed usb port. Power consumption printing (average) less than 450 w at 25 °c standby (average) less than 70 w at 25 °c sleep (average) less th...
Page 95
Appendix a - 5 a important information for choosing your paper this section provides information to help you choose paper to use with this printer. Note if you use paper other than the ones recommended, a paper jam or misfeeding may occur in the printer. See recommended paper on page 2-6. Before you...
Page 96
Appendix a - 6 a moisture content moisture content is the amount of water left in the paper after manufacture. It is one of the important characteristics of the paper. This can change greatly depending on the storage environment, although usually paper contains about 5% water by weight. Because pape...
Page 97: Index
I i - 1 i index numerics 2 sided printing ...................................... 2-18 a advanced tab .......................................... 3-4 b back view ................................................ 2-3 basic tab ................................................. 3-3 before using the machin...
Page 98
Index i - 2 i t toner cartridge ................................ 5-2, a-3 toner empty ..................................... 4-3, 5-3 toner low ................................................ 4-3 u utilities .....................................................A-2 w web site ...........................