Xerox DUPLEX TRAVEL User Manual - page 39

Xerox

®

 Duplex Travel Scanner

Maintenance

34

User Guide

1.

Place your thumbs on either side of the paper feed slot, underneath the lid of the scanner. 

Hold the scanner sides firmly and pull the scanner lid up to release it from the body of the 

scanner.

Use both hands to open the scanner, the lid is held down with locking arms on both sides of 

the paper feed slot. If you open only one side, you may damage the scanner lid.

2.

Remove the jammed paper and close the cover.

Gently close the scanner lid. Press down on both sides of the lid until you hear a click as the 

arms lock the scanner lid in place.

To reduce the number of paper jams, smooth and straighten the paper before scanning, and insert 

the paper evenly into the scanner.

Cleaning the Scanner

Clean the inside of the scanner to remove dust and paper debris from the scanner glass, pickup 

and feed rollers. Cleaning the inside of the scanner helps to keep your scanner operating at 

optimum performance. Dust accumulation on the rollers will prevent documents from feeding 

straight through the scanner, dust on the scanner glass will appear as lines in the scanned image.

You should clean the inside of the scanner at least once a week or as needed depending on how 

often the scanner is used. If cleaning the scanner does not resolve any image quality issues, 

please follow the instructions in the next section for calibrating the scanner.

You will need the cleaning cloth provided with your scanner.