Xerox Phaser 3310 User Manual - page 32
of
200
2.17
S
ETTING
U
P
Y
OUR
P
RINTER
If you have a USB (Universal Serial Bus) port enabled on your computer, and if
your computer is running Windows 98/Me/2000/XP, you can connect your
Phaser 3310 printer to the USB chain of devices.
Note:
Connecting the printer to the USB port of the computer requires a certified
USB cable. You will need to buy the USB 1.0 or 1.1 compliant cable.
Installing USB Driver
Installing USB driver in Windows 98/Me
3
Plug the other end into the USB port on the computer.
4
The Add New Hardware Wizard dialog box appears. Click
Next.
➝
To PC
1
Make sure that both the printer and computer are turned ON.
2
Plug one end of the USB cable into the USB port on the printer.
1. Connect printer with
USB cable and
install USB driver