Xerox VersaLink B605 User Manual - page 174
Solutions
Probable Causes
Load the tray with only one type and size of paper.
Tray is loaded with mixed paper.
Print-Quality Problems
Your printer is designed to produce consistently high-quality prints. If you observe print-quality problems,
use the information in this section to troubleshoot the problem. For more information, go to
www.xerox.com/office/VLB605_VLB615support
.
Caution
The Xerox Warranty, Service Agreement, or Xerox Total Satisfaction Guarantee does not cover damage
caused by using unsupported paper or specialty media. The Xerox Total Satisfaction Guarantee is
available in the United States and Canada. Coverage could vary outside these areas. Contact your local
Xerox representative for details.
Note
To ensure consistent print quality, the toner, print, and drum cartridge for many devices are designed
to cease functioning at a predetermined point.
Controlling Print Quality
Various factors can affect the quality of the output of your printer. For consistent and optimum print
quality, use paper designed for your printer, and correctly set the Print-Quality Mode. Follow the guidelines
in this section to maintain optimum print quality from your printer.
Temperature and humidity affect the quality of the printed output. The range for optimal print quality
is 15–28ºC (59–82ºF) and 20–70% relative humidity. However, print quality can be affected when
operating near the limits for both temperature and humidity.
Paper and Media
Your printer is designed to use various paper and other media types. Follow the guidelines in this section
for the best print quality and to avoid jams:
• Use only Xerox-approved paper. For more information, refer to
.
• Use only dry, undamaged paper.
Xerox
®
VersaLink
®
B605/B615 Multifunction Printer
8-20
User Guide
Troubleshooting