Xerox Wide Format 6604 Safety Manual - page 16
Do not attempt to rework, pull, bend or damage the power cords in any way. Do not
place heavy objects on the cords because that can also damage them.
Stop operation immediately if your machine produces smoke, excessive heat, unusual
noises or odors, or if water, coffee, or other liquids are spilled on the machine. Immediately
turn off the machine and unplug it and contact your Xerox Representative.
Environment and Temperature
The machine is designed to operate normally within the following recommended limits:
• Temperature range: 50 - 90°F (10 - 32°C)
• Humidity range: 15 - 85% (no condensation)
At 47.5% humidity, the temperature should be 90°F or below; at 85% humidity, the
temperature should be 82°F or below.
NOTE
Do not expose the scanner or its power supply to temperature conditions below 50°F
(10°C) or above 95°F (35°C) or to extreme humidity conditions of less than 35% or
more than 80% Relative Humidity.
Sudden temperature fluctuations can affect copy quality. Heating a cold room too
quickly can cause condensation to form inside the machine, which can interfere with
image transfer.
Warning and Caution Label Locations
The locations of the warning and caution labels on the Xerox Wide Format 6604/6605
Solution with FreeFlow Accxes Print Serve are shown below.
Xerox
®
Wide Format 6604/6605 Solution
™
1-12
Safety Guide
Safety and Certifications