Xerox work centre 7800 series Installation Manual - page 28
Appendix
WorkCentre
®
7800 Series
Customer Expectation and Installation Guide
25
Configure the Xerox WorkCentre PC drivers to use the IP address assigned to the Fiery Network Controller and to use Port 9200 to bypass the Fiery RIP for
direct printing to the WorkCentre Network Controller using Xerox Print driver
Print Quality and Color Management
Print Resolution is 600x600x1, 1200x1200x1 and 600x600x8 dpi
Pantone Calibrated
ICC v4 Profile support
Rich Black & Print Grays using Black only
Security Features
Secure Erase, IPSec, 802.1x, IPV 6, SNMPv3, MAC filtering, IP filtering/Port blocking, User Authentication, Certificate Management, SSL/TLS support
Network Switch
When the Fiery Network Controller is connected, it allows only one network drop with only one IP address (single IP) for the complete system (WorkCentre 7800 Series
+ Fiery Controller).
Certain EIP applications (Xerox Solutions applications or 3rd Party Applications, etc) are supported when in a single IP configuration.
The
Network Switch can be added to allow the customer to still have one network drop with a two IP address configuration to support other EIP applications (Xerox
Solutions applications or 3rd Party Applications, etc).
This allows the EIP application direct access to the WorkCentre 7800 Series.
Reference Material
A complete set of virtual customer documentation is provided with the Fiery Network Controller. User documentation in other languages is also available at the
following link:
http://services.efi.com/support/vfigs/9019710383/
Software Updates
Periodically, Xerox will make available bug fixes and other software releases. The EFI option solution must have an Internet connection in order to take advantage of
automatic s/w updates and insure the solution is maintained with the latest software and fixes. All software releases and bug fixes are designed to be customer
installable from the Internet and it will be the customer’s responsibility to insure Internet access and perform the software upgrade activities.
Print Quality and Color Management
Print Resolution is 600x600x1, 1200x1200x1 and 600x600x8 dpi
Pantone Calibrated
ICC v4 Profile support
Rich Black & Print Grays using Black only
Security Features
Secure Erase, IPSec, 802.1x, IPV 6, SNMPv3, MAC filtering, IP filtering/Port blocking, User Authentication, Certificate Management, SSL/TLS support
Reference Material
A complete set of virtual customer documentation is provided with the Fiery Network Controller. User documentation in other languages is also available at the
following link:
http://services.efi.com/support/vfigs/9019710383/
Software Updates
Periodically, Xerox will make available bug fixes and other software releases. The EFI option solution must have an Internet connection in order to take advantage of
automatic s/w updates and insure the solution is maintained with the latest software and fixes. All software releases and bug fixes are designed to be customer
installable from the Internet and it will be the customer’s responsibility to insure Internet access and perform the software upgrade activities.
Responsibility Matrix
Action
Customer
Xerox
Install the WorkCentre
X
Unpack & install EFI Option /
components
X
Install the utilities, and printer drivers
on client PCs.
X
Ensure network configuration
X
Confirm network integrity
X