Xerox XM7-19w User Manual - Using The Osd Menu

On-Screen Display (OSD) Menu

18

Xerox© LCD Monitor User’s Manual

To create the best picture, your XM7 has been preset at 

the factory with the Preset Mode Timing shown on page 27.

The OSD (On-Screen Display) Menu allows the user to adjust

various settings and options by following the steps below.

1

  Press the

 MENU button to display the OSD. The OSD main 

menu provides an overview of the selection of controls 

available.

2

  Press the

 DOWN or UP button to highlight the desired icon.  

Then, press the 

MENU button to activate the highlighted 

icon.

3

  Press the

 DOWN or UP button to select the desired 

adjustment icon. Then, press the 

MENU button.

4

  Press the 

DOWN or UP button to change the value of the 

selected item.

5

  Select the 

exit icon to exit the OSD.

6

  Repeat steps 1 through 4 to make further adjustments. All 

changes are stored immediately. 

Using the OSD Menu

3  On-Screen Display (OSD) Menu

picture

advanced

audio

options

utilities

reset

exit

auto adjust 

to select

brightness

contrast

h position

v position

phase

clock

exit