Xerox XM7-19w User Manual - 2  Installation

Installation

12

Xerox© LCD Monitor User’s Manual

1 

Turn off the computer and unplug the power cord.

2 

Connect the signal cable to the D-SUB port on the back of 

the computer.

3 

Connect the audio cable to the line-in port on the back of the 

computer.

4 

Connect the power cord to the LCD monitor and wall outlet. 

5 

Press the     button, located on the bottom side of the main 

unit to turn the monitor on, then turn the computer on. If the 

monitor displays an image, the monitor is successfully 

installed. If no image is displayed, check all connections.

Refer to the owner’s manual of the computer for connections.

In the process of connecting external equipment, do not connect 

any AC power cords to wall outlets until all other connections 

are completed.

2  Installation

Connecting Your LCD Monitor to a Computer 

Method 1 : Analog (D-SUB) Connection