Summary of TK103-2
Page 1
G g p p s s t t r r a a c c k k e e r r 103-2 quick start guide.
Page 2
Th anks for choose our product. This quick start guide tells you how to se t up your gps tracker. see picture 1 connect antennas in right way and put antennas outside. see picture 2 inside two sim cards and tf card. see picture 3 connect wires in right way. unit will turn on automatically wh...
Page 3
How to connect the antenna..
Page 4: Wires Connection.
Wires connection. ⒈ black wire: -12v ⒉ red wire: +12v ⒊ purple wire : acc ⒋ microphone ⒌ connect relay. ⒍ white wire: connect guard against theft implement. ⒎ sos. ⒏ oil and power 8.
Page 5: Two Sim Card.
Two sim card. Unit will turn on for another one automatically when no fee with one sim card. Tf card*. Support 2gb tf card, over-the-air update, resume from break point cannot work without tf card. Over the air update. Update can be finished by sms ,and also the software on our website will be updat...
Page 6: Password.
Password. We suggest change the password and keep it in mind. Please contact with franchiser if you forgot it authorization. , unit only work with correct one. Sms will be send to authorized number. Authorized number can send the command without password. Traffic mode when moved ,the device will sen...
Page 7: Internet Monitor.
Internet monitor. Set apn. Apn stands for access point name. For example picture ,china mobile “cmnet”, send sms“123456apn cmnet”to the unit ； if apn have user name and password, for example picture ,microcell ，apn is internet., user name ：fido , password： fido.
Page 8
Ip and port. When apn setting succeed, send sms“123 456adminip 119.147.23.100 2337” ，it will reply“adminip ok!”.“2337”is port number data transmission. Send sms:“123456t010s***n”to the unit, will reply”t010s***n ok”.Data will be transmissionto the platform every 10 seconds. Stop send sms “123456tmno...
Page 9: Internet Platform.
Internet platform. Please contact franchiser. They will supply you platform website, user name, password and help you to add your unit into platform. You can check more inf ormation about platform i n cd-rom..
Page 10: Warning
Remote control oil and circuit. Send sms“123456powercar 11”to cut off oil and circuit ；send sms“123456powercar 00”to supply oil and circuit again. Warning ：please make sure the vehicle stay still before using this order..
Page 11
Engine alarm (acc) and fortifying mode engine alarm (acc), after purple acc line connected to the car engine ignition wire, every time when engine start and stop, tracker will report to authorized mobile and platform. Engine stop: "accstop"; engine start : "accstart". Fortifying mode, send sms comma...
Page 12: Fortify Or No Fortify
Fortify or no fortify call tracker can switch fortify and ”no fortify”. Call one time, the tracker will go to “no fortify” model. Call again, switch into “fortify” model. If set fortify successfully, will receive a sms reply of “ move in+ longitude and latitude”. Then when the car move more than 200...
Page 13
Authorization and password. Call the unit for 10 times and successful positioning. This number will be the default for authorized number. Send sms "123456 admin 159200xxxxx" to the unit,it will be authorized of this number.Only 5 numbers able to be authorization.If need cancel, send”123456admin”. Se...
Page 14: One Time.
One time. Using your mobile phone call the inside number of unit .It will hang up and reply to a real time positioning messages. Contents include: latitude, longitude, speed, date, battery, signal, imei number. Send sms "123456smslinkone" to the unit, will replylocation sms..
Page 15: Successive Positioning.
Successive positioning. Send sms “123456t030s002n” to the unit, will reply “t030s002n ok!” it will report the real time sms at 30s interval for 2 times. Notice: s=second, minute, h=hour. The shortest interval time is 005s, the longest interval time is 255h; reply the most times is 999n, unlimited ti...
Page 16: Monitor.
Monitor. Send "123456monitor”to the unit, will reply”monitor ok!” ，then call the unit to enter into the monitor mode .Send “123456tracker”to the unit when need to cancel ,it will reply “tracker ok!”back into the positioning mode again..
Page 17: Traffic Mode.
Traffic mode. Send sms "123456traffic 5" to the unit, will reply "traffic 5 ok!". 5 stands for the sensibility level, setting from 0 to 10. 0 means closing the function. When moving, the unit will send gps data to monitor platform or mobile phone automatically every 30 seconds; when stay still, the ...
Page 18: Sensor Alarm.
Sensor alarm. Send sms "123456shake 5" to the unit,it will reply "shake 5 ok!". The unit will send alarm message to phone when shake. Send sms“123456shake 0” when needs to cancel the function.Number 5 stands for the sensibility level, setting from 0 to 10. 0 means closing the function.Notice: this f...
Page 19: Overspeed Alarm.
Overspeed alarm. Sendsms“123456speed 050”to the unit,it will reply “speed ok!”. When the unit moves exceeding 50 km/h, the unit will send sms alarm. When the speed is no more than 50km/h, it will send alarm as well. Send “123456speed 0”when needs to cancel. Notice: speed alarm is set at least 50km/h...
Page 20: Movement Alarm.
Movement alarm. When the unit stays immobile in a plac e for more than 3 minutes, send sms“1234 56move 200”to the unit, it will reply“move 200 ok!". It will send alarm sms when mov es out of 200 meters.Send sms“123456mo ve 0”when needs to cancel..
Page 21: Geo Fence.
Geo fence. Set geo fence for the unit to restrict it movement within a district. The unit will se nd sms to the authorized numbers when it breaches the district. If needs send sms"1 23456stockade 22589155n,113.827732e;2 2.559000n,113.897111e”. Stop send “123456stockade”.
Page 22: Total Mileage Calculation.
Total mileage calculation. If you want to calculate the mileage, according to the following steps: 1. Send sms“123456gprsdata 1”to the unit. 2. Send sms “123456t010s***n”to the unit. 3. Send sms “123456km0”to the unit. 4. Send sms “123456km ？”,it will reply the mileage dates..
Page 23: Sos.
Sos. Press the sos for 3 secondwhen dangerous. It will send“ help me ” to all the authorized numbers.
Page 24: Map Link.
Map link. There are two formats: date format, map link format. Send sms“123456smslink ”to the unit, it will reply “smslink ok” ，then call the unit again, it will reply map link, access to this website may view location map. Send sms“123456smtext”to the unit will restore to date format..
Page 25: Overtheairupdate*.
Overtheairupdate*. We will update software, if you need update tracker, please install memory card (tf), and send sms “123456ldu,server=http://www.***.Com/ down/vpj.Bin,en=72”. After you receive 3pcs of related message, it means updated successfully. Notice ：need about 5 min to do updating. “***“it ...
Page 26: Status And Time
Status and time send“123456status”to unit ，it will re ply sms. Include: imei 、speed、battery、 position state 、time、ip、apn、port etc. Default is beijing time, if you want to c hange time, send sms“123456time zone - 6.5”.Notice:“+”no need to write ，“-”must write ； 6.5=6：30..
Page 27: Udp/tcp.
Udp/tcp. Default is tcp ，if you want to change into udp ，send sms“123456gprsmode 1” to unit ，if you want change back to tcp, send sms“123456gprsmode 0”. Version. Send sms“123456version”to unit ，it will reply version information reset. Send sms“123456begin”to unit, it will reply“begin ok!”, then unit...
Page 28: Product Parameter
Product parameter gsm/gprs module: simcom sim900 band: 850/900/1800/1900mhz communication protocol: tcp/udp cpu: arm7. gps chip: sirf3 sensitivity: -159dbm accuracy: 5-20m time to first fix: cold status 45s hot status 1s car charger: 12-24v input 5v output battery: 3.7v 1200mah li-io...