XT-009 Gps tracker user manual
13
l
Send SMS “
smstext+password
”, it will reply “smstext OK”. The tracker will reply text SMS to
cellphone
9.15 SMS ONE
Send SMS
“
smsone+password
”
.The tracker will only send one text SMS to the cellphone or server.
9.16 Low Battery Alert
When the battery inside is less than 3.7 V, it will send low battery alert to admin number
9.17 SMS Center
l
Setup: Send SMS
adminsms+password+space+cell phone number
to setup the SMS center.
The tracker will reply Geo-info & authorized number to sms center number even if the admin
numbers call or send command to the tracker
l
Cancel: Send SMS
noadminsms+password
to cancel the SMS center.
Note:
l
The SMS message must in Text format, can’t be identified for PDU format.
l
Please use the tracker outside for the first time so that it can get gps signal easily and quickly
9.18 GSM ID
GSM ID is in each sms or gprs data. The tracker can be found by GSM ID without gps signal. But the
customers have to ask their GSM operator for data base of the GSM ID.
9.19 Motion Sensor
l
Setup: Send SMS
shake+password+space+1-10
to the tracker to set up this function
(1-10 means the level of intensity)
l
Send SMS
shake+password+space+1
is the least sensitivity . Have to shake the tracker strongly to
get the alert.
l
Send SMS
shake+password+space+10
is the most sensitivity . Have to shake the tracker slightly
to get the alert
l
Cancel: Send SMS
shake+password+space+0
to remove this function.
9.20 SD card
A mini SD card can be put in the tracker’s SD card slot. The GPRS data can be saved in the SD card if
GPRS is off. It will send data to the GPRS server again when it is on.
l
Setup: Send SMS
sdlog+password+space+1
to activate the sd card-saving function
l
Cancel: Send SMS
sdlog+password+space+0
to the tracker to deactivate this function