- DL manuals
- XFP
- Security System
- NETWORKABLE ANALOGUE ADDRESSABLE FIRE ALARM CONTROL PANEL
- User Manual
XFP NETWORKABLE ANALOGUE ADDRESSABLE FIRE ALARM CONTROL PANEL User Manual
Summary of NETWORKABLE ANALOGUE ADDRESSABLE FIRE ALARM CONTROL PANEL
Page 1
Xfp networkable analogue addressable fire alarm control panel user manual and log book approved document no. Dfu2000501 rev 2.
Page 2
Xfp user manual & log book • approved document no. Dfu2000501 rev 2 • page 2 of 28 xfp networkable analogue addressable fire alarm panel contents important safety notes ........................................................................................................3 introduction ...............
Page 3
Xfp user manual & log book • approved document no. Dfu2000501 rev 2 • page 3 of 28 xfp networkable analogue addressable fire alarm panel important safety notes the panel is safe to operate provided it has been installed in compliance with the manufacturer’s instructions and used in accordance with t...
Page 4
Xfp user manual & log book • approved document no. Dfu2000501 rev 2 • page 4 of 28 xfp networkable analogue addressable fire alarm panel introduction fire alarm systems - an overview the primary purpose of a fire alarm system is to provide an early warning of a fire so that people and animals can be...
Page 5
User responsibilities bs5839-1: 2002 is the british standard code of practice for the design, installation, commissioning and maintenance of fire detection and fire alarm systems for buildings. Section 7 of the standard (user responsibilities) states that a named responsible person should be appoint...
Page 6
Panel layout, indicators & controls layout of single loop 16 zone fire panel (code entry version) layout of one to two loop 32 zone fire panel (code entry version) 10:59:03 24 jun : normal fredco warehousing 10:59:03 24 jun : normal fredco warehousing led indicators liquid crystal display provides d...
Page 7
Accessed lit yellow when the panel is in access level 2 or 3 general disablement lit yellow when one or more zone, sounder, output or relay is disabled phased evacuation flashes yellow when there is a phased evacuation in process general fault flashes yellow when there is a fault condition on the pa...
Page 8
General user operation ((m me es ss sa ag ge es s t th ha at t m ma ay y a ap pp pe ea ar r o on n t th he e p pa an ne el l’’s s d diis sp pl la ay y a an nd d w wh ha at t t th he ey y m me ea an n)) at access level 1, the panel’s display provides feedback on the system’s current status. Priority ...
Page 9
Fire conditions in the event of a fire condition:- • the panel’s general fire indicator will flash; • the panel’s internal sounder (if enabled) will pulse; • the relevant fire zone indicator on the panel will flash; • the panel’s display will show the number and name of the zone in fire (see example...
Page 10
1st-stage fire conditions on sites where there is a high incidence of nuisance alarms or where the consequence of a false alarm could result in the activation of, say, a sprinkler system, the fire officer may have permitted certain zones to be set up with:- • a 1st-stage zone dependency function - t...
Page 11
Pre-alarm conditions pre-alarm conditions are designed to warn the user that a smoke or heat detector is registering an increase in conditions that could lead to a fire. Pre-alarms must be taken seriously as a fire condition could be imminent. In the event of a pre-alarm condition:- • the panel’s in...
Page 12
Access level 1 (general user) controls & menu options access level 1 is the normal user level which is accessible to everyone. At this level you can:- • scroll through any fire, pre-alarm and fault conditions (as described on pages 8-11) • view any disablements or zones that are being tested (if app...
Page 13
Pressing the 5 and 6 buttons will scroll the display through all active fire conditions. More detailed information (if applicable) can be viewed by pressing the panel’s more information button. To return to the main access level 1 menu press the escape 3 button. Display fault events this function is...
Page 14
Access level 2 (authorised user) controls & menu options access level 2 is available to authorised, trained personnel only. At this level, the panel’s silence/resound sounders, control panel reset and investigate buttons become active and you are able to: • scroll through any fire, pre-alarm or faul...
Page 15
Xfp user manual & log book • approved document no. Dfu2000501 rev 2 • page 15 of 28 xfp networkable analogue addressable fire alarm panel when in access level 2 (see page 14) the following menu options wil be available at the panel’s display for authorised users. They can be navigated using the pane...
Page 16
Set time and date this function allows the panel’s time and date to be adjusted. When selected, press the accept 4 button and the following window (or similar) will appear: use the 5 and 6 buttons to adjust the hour (the panel has a 24 hour clock so hours 0 to 23 are available). When the correct hou...
Page 17
Set/clear disablements selecting this menu option takes you to the disablements sub-menu which allows you to enable or disable zones, sounders, outputs, relays, individual devices and/or the panel’s fault relay. We strongly recommend all disablements are regularly reviewed and immediately enabled wh...
Page 18
Enable/disable relays this function allows the disablement of one or more of the panel’s 3 auxiliary relays from activating as pro- grammed. When selected, press the accept 4 button and a window similar to the one below will appear:- select the relay (1, 2 or 3) to be disabled/enabled using the 5 an...
Page 19
Change the access level 2 code this function allows you to change the four digit code needed to activate the panel’s access level 2 menu options. When selected, press the accept 6 button and the following window will appear: using the 5 (1) 4 (2) 6 (3) 3 (4) buttons, enter the new four digit access ...
Page 20
Xfp user manual & log book • approved document no. Dfu2000501 rev 2 • page 20 of 28 xfp networkable analogue addressable fire alarm panel system set-up data chart important: this page should be carefully completed by the system engineer prior to handover. Zone functions tick the appropriate column f...
Page 21: Fire Alarm Log Book
Xfp user manual & log book • approved document no. Dfu2000501 rev 2 • page 21 of 28 xfp networkable analogue addressable fire alarm panel 14 cfp user manual • approved document no. Dfu7001000 rev 4 cfp 2/4/8 zone fire alarm panel fire alarm log book it is recommended that this log book be maintained...
Page 22
Xfp user manual & log book • approved document no. Dfu2000501 rev 2 • page 22 of 28 xfp networkable analogue addressable fire alarm panel 15 cfp user manual • approved document no. Dfu7001000 rev 4 cfp 2/4/8 zone fire alarm panel details of tests (including fire drills), actual fire alarms, disablem...
Page 23
Xfp user manual & log book • approved document no. Dfu2000501 rev 2 • page 23 of 28 xfp networkable analogue addressable fire alarm panel 16 cfp user manual • approved document no. Dfu7001000 rev 4 cfp 2/4/8 zone fire alarm panel date time event e.G. Test, fire alarm signal, fault zone device action...
Page 24
Xfp user manual & log book • approved document no. Dfu2000501 rev 2 • page 24 of 28 xfp networkable analogue addressable fire alarm panel 16 cfp user manual • approved document no. Dfu7001000 rev 4 cfp 2/4/8 zone fire alarm panel date time event e.G. Test, fire alarm signal, fault zone device action...
Page 25
Xfp user manual & log book • approved document no. Dfu2000501 rev 2 • page 25 of 28 xfp networkable analogue addressable fire alarm panel 16 cfp user manual • approved document no. Dfu7001000 rev 4 cfp 2/4/8 zone fire alarm panel date time event e.G. Test, fire alarm signal, fault zone device action...
Page 26
Xfp user manual & log book • approved document no. Dfu2000501 rev 2 • page 26 of 28 xfp networkable analogue addressable fire alarm panel 18 cfp user manual • approved document no. Dfu7001000 rev 4 cfp 2/4/8 zone fire alarm panel date time cause (if known) device that triggered the alarm signal fals...
Page 27: Of Installation
Xfp user manual & log book • approved document no. Dfu2000501 rev 2 • page 27 of 28 xfp networkable analogue addressable fire alarm panel 19 cfp user manual • approved document no. Dfu7001000 rev 4 cfp 2/4/8 zone fire alarm panel address: _____________________________________________________________...
Page 28: Of Commissioning
Xfp user manual & log book • approved document no. Dfu2000501 rev 2 • page 28 of 28 xfp networkable analogue addressable fire alarm panel 20 cfp user manual • approved document no. Dfu7001000 rev 4 cfp 2/4/8 zone fire alarm panel address: _____________________________________________________________...