XFX nForce 610i Series User Manual - page 28
of
29
XFX nForce 630i/610i Motherboard
22
Jumper Settings
The motherboard contains a 3-pin BIOS configuration jumper that
enables all board configurations to be done in the BIOS Setup
program.
Clear CMOS Jumper: JBAT1
The motherboard uses the CMOS RAM to store all the set parameters.
The CMOS can be cleared by removing the CMOS jumper.
Use the following procedure to clear CMOS:
1.
Turn off the AC power supply and connect pins 2 and 3 together
using the jumper cap. It normally takes about 1 to 2 minute for
the CMOS to clear.
2.
Return the jumper setting to normal (pins 1 and 2 together with
the jumper cap).
3.
Turn the AC power supply back on.