1. DL manuals
  2. XG Technology
  3. Wireless Access Point
  4. CN1100
  5. Installation Manual

XG Technology CN1100 Installation Manual

Summary of CN1100

  • Page 1

    G7601 - release 3.8.

  • Page 2

    2 cn1100 access point - installation guide - g7601 - 3.8 product features and specifications are subject to change without prior notice. Xg® and xmax® are registered trademarks of xg technology, inc. All other trademarks used herein are property of their respective owners. For the latest product doc...

  • Page 3: Table of Contents

    3 cn1100 access point - installation guide - g7601 - 3.8 table of contents introduction ............................................................................................................... 7 about this product ..................................................................................

  • Page 4

    4 cn1100 access point - installation guide - g7601 - 3.8 gps antenna .................................................................................................................................... 32 antenna installation and adjustment overview .....................................................

  • Page 5: List Of Figures

    5 cn1100 access point - installation guide - g7601 - 3.8 technical specifications ............................................................................................ 52 warranty ....................................................................................................................

  • Page 6

    6 cn1100 access point - installation guide - g7601 - 3.8 this page intentionaly left blank.

  • Page 7

    7 cn1100 access point - installation guide - g7601 - 3.8 the xmax® cn1100 is an all-ip, high-capacity, high-performance wireless access point that delivers unmatched range, coverage and reliability in even the most challenging conditions. The cn1100 is a waterproof, ruggedized device, and built to o...

  • Page 8

    8 cn1100 access point - installation guide - g7601 - 3.8 the cn1100 access point is a compact form-factor base station used for communicating wirelessly with cn5100 mobile hotspots and other xmax bridge devices. The xmax cn1100 is an all-ip, high- capacity, high-performance wireless access point tha...

  • Page 9

    9 cn1100 access point - installation guide - g7601 - 3.8 the cn1100 features seven connectors: four external xmax antenna connectors (n-type jack, female socket) a connector for an external gps antenna (tnc jack, female socket) a weatherproof ethernet connector an unused connector top connectors bot...

  • Page 10

    10 cn1100 access point - installation guide - g7601 - 3.8 these notices apply to the cn1100 access point. Be sure to read, understand and follow these instructions. Heed all warnings. Only use accessories and attachments specified by xg technology. Keep a copy of these instructions for future refere...

  • Page 11

    11 cn1100 access point - installation guide - g7601 - 3.8 this equipment complies with fcc radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 25 cm (0.82 ft) between the radiator and your body. This transmitte...

  • Page 12

    12 cn1100 access point - installation guide - g7601 - 3.8 the cn1100 is a 2x4 mimo device with four antenna connectors — two tx/rx and two rx-only. All connectors are always used. Omni, panel, and sector antenna configurations are supported. For optimum performance, the cn1100 should be placed as cl...

  • Page 13

    13 cn1100 access point - installation guide - g7601 - 3.8 the following illustrations show typical antenna configurations. When 2x2 mimo sector antennas are used, they must be separated by at least 2 feet (0.6 meters) in horizontal or vertical orientation. This is the minimum separation distance req...

  • Page 14

    14 cn1100 access point - installation guide - g7601 - 3.8 four antennas are used with an omni antenna installation. The antennas should be arranged in a square configuration with two feet (2 ft.) separation on each side. This is the minimum separation distance required for proper operation. Omni ant...

  • Page 15

    15 cn1100 access point - installation guide - g7601 - 3.8 this is a typical tower-mounted cn1100 installation with an xmax kp performance 2x4 mimo panel antenna (kppa-900mhz4p90s), exclusively supplied by xg. The required parts are listed. Cn1100 panel antenna installation parts list supplied by xg ...

  • Page 16

    16 cn1100 access point - installation guide - g7601 - 3.8 this procedure should be completed before installing the cn1100 in a service location. These steps set up the cn1100 access point for use. After completing these configuration steps, the cn1100 access point will be fully functional and ready ...

  • Page 17

    17 cn1100 access point - installation guide - g7601 - 3.8 1. Use a laptop or desktop computer to configure the cn1100 access point. Configure the computer network adapter to internet protocol version 4 (tcp/ipv4) for a static ip address and subnet mask. Before you continue be sure to take note of th...

  • Page 18

    18 cn1100 access point - installation guide - g7601 - 3.8 the cn1100 management window opens to the home view. 9. On the tool bar, click accounts to open the user accounts view. Xg technology strongly recommends changing the default account password..

  • Page 19

    19 cn1100 access point - installation guide - g7601 - 3.8 important before clicking apply , be sure to write down the new password, and then keep it in a safe place for future reference: the change user password section, displays the current username . The password length must be a minimum of 6 char...

  • Page 20

    20 cn1100 access point - installation guide - g7601 - 3.8 11. In the transmit power section, enter the desired transmit power level. Important the transmit power level must only be set within allowable fcc limits. Per fcc regulations, only approved antennas may be used: the only sector antenna appro...

  • Page 21

    21 cn1100 access point - installation guide - g7601 - 3.8 14. In the dhcp configuration section, set the dhcp mode , or a desired static ip address range. Note this completes the minimum first-time setup steps. However, the cn1100 requires additional setup settings for use within a network. This inc...

  • Page 22

    22 cn1100 access point - installation guide - g7601 - 3.8 note xg technology recommends that the cn1100 access point be configured on a bench before installing the device in the field. Please refer to the topic configuring the cn1100 access point on page 16 . These checklists may be of assistance in...

  • Page 23

    23 cn1100 access point - installation guide - g7601 - 3.8 installation tool kit checklist 8 mm metric wrench 10 mm metric wrench 11 mm metric wrench cat 5 crimp tool digital inclinometer or magnetic angle locator magnetic compass or smart phone compass app colored weatherproof tape figure 5 — instal...

  • Page 24

    24 cn1100 access point - installation guide - g7601 - 3.8 poe++ 56 vdc power supply ac power cord weatherproof ethernet kit ferrite beads antenna cables cn1100 access point gps antenna with right-angle connector mounting hardware the standard package also includes an xmax kp performance 2x4 mimo pan...

  • Page 25

    25 cn1100 access point - installation guide - g7601 - 3.8 each of these solutions features the xmax panel antenna with 90 degree separation to attain 360 degree coverage. Four cn1100 access point devices mounted to a building. Four cn1100 access point devices mounted to a pneumatic mast. Four cn1100...

  • Page 26

    26 cn1100 access point - installation guide - g7601 - 3.8 these steps outline the basic tasks required to complete a successful installation at each tower location. Specific steps will vary, depending upon the requirements of the system design and the conditions each site. Details regarding specific...

  • Page 27

    27 cn1100 access point - installation guide - g7601 - 3.8 when installing multiple cn1100 access point devices at a site, color code each sector. Use colored weatherproof tape on each end of each ethernet cable run, and then record the azimuth and tilt of each sector. Refer to the example shown. Ant...

  • Page 28

    28 cn1100 access point - installation guide - g7601 - 3.8 correct orientation and tilt of the antennas is the most critical part of the installation. Alignment of the antennas consists of two steps, azimuth orientation (horizontal) and mechanical tilt adjustment (vertical). Azimuth is the horizontal...

  • Page 29

    29 cn1100 access point - installation guide - g7601 - 3.8 this guide may assist in estimating the time required to complete each xmax cn1100 site installation. Every installation has its own unique requirements, specifications, and challenges. The provided timelines are subjective. Estimated install...

  • Page 30

    30 cn1100 access point - installation guide - g7601 - 3.8 this checklist may be used to ensure the integrity and quality of the installation during a site inspection. Completion and quality control check list item description satisfactory completion notes all equipment installed per site plan gps co...

  • Page 31

    31 cn1100 access point - installation guide - g7601 - 3.8 b a c d d c b a these steps outline the basic tasks required to prepare for a successful installation using a panel antenna. These initial steps prepare the cn1100 access point for placement in a service location. 1. Locate the supplied mount...

  • Page 32

    32 cn1100 access point - installation guide - g7601 - 3.8 important ensure that the correct access point connector is attached to the correct antenna connector. 6. Locate the two supplied u-bolts, and then install them onto the mounting bracket, as shown. 7. Locate the supplied gps antenna and right...

  • Page 33

    33 cn1100 access point - installation guide - g7601 - 3.8 when multiple antennas are installed on the tower, mast, or other support structure, each antenna is installed at the same height (vertical level), using standard installation practice. On a tower structure, mount the antennas on a vertical o...

  • Page 34

    34 cn1100 access point - installation guide - g7601 - 3.8 9. Measure and adjust the tilt of the antenna to 0° with an inclinometer positioned against the back of the antenna. Securely tighten all mounting bolts. 10. Install antenna #3 at the western most mounting location. 11. Adjust the azimuth (ho...

  • Page 35

    35 cn1100 access point - installation guide - g7601 - 3.8 7. Select an appropriate location near the antenna to mount the cn1100 access point and then secure it with an appropriate mounting bracket. Important: omni or sector antenna installations a properly grounded lightning arrester must be instal...

  • Page 36

    36 cn1100 access point - installation guide - g7601 - 3.8 20. Install two ferrite beads on this cable, one within 6 inches of the poe++ power supply, and also one near the other end of this cable. 21. Connect the supplied ac power cord to the poe++ power supply. 22. After checking all connections, p...

  • Page 37

    37 cn1100 access point - installation guide - g7601 - 3.8 the cn1100 access point device requires a significant number of configuration steps. The settings for network, rf, mac protocol, and dsp must be configured. The cn1100 management tool provides a means to perform the complex configuration and ...

  • Page 38

    38 cn1100 access point - installation guide - g7601 - 3.8 this diagram shows the major functions in each of the cn1100 management views. Topics in this guide describe the features and usage information for each cn1100 management function. Click any of the six cn1100 management tabs, at the top of th...

  • Page 39

    39 cn1100 access point - installation guide - g7601 - 3.8 the home view is the initial page presented. This page displays real-time system information from the xmcc database for: devices services dhcp status memory the information – home view displays device information : version wireless lan xmax r...

  • Page 40

    40 cn1100 access point - installation guide - g7601 - 3.8 the information – xmax view displays wan information : configuration type total traffic rf settings wireless information the information – gps view displays gps information : status coordinates last update click the map to open google maps in...

  • Page 41

    41 cn1100 access point - installation guide - g7601 - 3.8 the information – sys-info view displays system information : devices services dhcp status memory the information – tools view displays system tools : network tools click the down arrow to the right of ping to reveal the other tools: restart ...

  • Page 42

    42 cn1100 access point - installation guide - g7601 - 3.8 the settings – lan view enables configuration of the network parameters on the base station: hostname ip address subnet mask gateway ip primary dns server secondary dns server mac addresses are displayed. Stand alone dhcp can be disabled, or ...

  • Page 43

    43 cn1100 access point - installation guide - g7601 - 3.8 the settings – snmp view enables configuration of the snmp settings: snmp stats updating can be enabled and disabled. Set community string . Configure snmp trap handlers . The settings – xdrive view enables configuration of the xdrive setting...

  • Page 44

    44 cn1100 access point - installation guide - g7601 - 3.8 the logs view enables viewing of base station logs. Scroll down to view any available log. Messages software events debug debug events syslog all events dmesg hardware events mac bme mainboard events useful icons are available in the upper ri...

  • Page 45

    45 cn1100 access point - installation guide - g7601 - 3.8 the upgrade view displays the version and statistics for the cn1100: software components xmax components control system components this view also enables upgrading and rollback of the firmware and software on the base station..

  • Page 46

    46 cn1100 access point - installation guide - g7601 - 3.8 the self organization features in xmax son provide: auto channel selection upon boot web gui accessible rules table periodic re-scan for better channel bridge devices, xmods and xvms, scan all possible channels and build available and preferr...

  • Page 47

    47 cn1100 access point - installation guide - g7601 - 3.8 on initialization, the cn1100: applies random backoff (in 10s of seconds) scans the preferred and enabled channels applies the table rules (interference, loading, and beacon sinr) selects the best channel begins operating the cn1100 uses the ...

  • Page 48

    48 cn1100 access point - installation guide - g7601 - 3.8 1. Install the cn1100s and antennas. 2. Power on the cn1100, and then open the cn1100 management window, as described in the topic configuring the cn1100 access point on page 16 . 3. On the cn1100 management toolbar, click settings , and then...

  • Page 49

    49 cn1100 access point - installation guide - g7601 - 3.8 this map shows a network with three tower locations. Tower 1 has an omnidirectional antenna, towers 2 and 3 each have three sector antennas. To avoid interference, the channel selected for each antenna should consider the possibility of inter...

  • Page 50

    50 cn1100 access point - installation guide - g7601 - 3.8 proper planning of the network by a network architect is essential. This ensures that the ip address of any network device does not conflict with another device on the network. This diagram represents a sample network layout. Sample network a...

  • Page 51

    51 cn1100 access point - installation guide - g7601 - 3.8 propagation coverage can be estimated with minimal information of your planned coverage area. Contact the xmax customer service department for assistance in planning the optimum network coverage for your needs. Also inquire about other useful...

  • Page 52

    52 cn1100 access point - installation guide - g7601 - 3.8 system overview frequency band 902-928 mhz channel bandwidth: 1.44 mhz modulation adaptive bpsk / qpsk / qam16 / qam64 spectral efficiency up to 4.25 bits/hz phy protocol proprietary ofdm, 2x4 mimo mobility up to 100 mph handoff sessions are ...

  • Page 53: Cn1100 Access Point

    53 cn1100 access point - installation guide - g7601 - 3.8 cn1100 access point xg technology, inc. (“xg”) 240 south pineapple avenue, suite 701 sarasota, fl 34236 unless a different period is specified for a particular hardware product, or in a sales agreement between xg and customer, or in the publi...

  • Page 54

    54 cn1100 access point - installation guide - g7601 - 3.8 customer is responsible for shipment to xg (or authorized service provider) and assumes all costs and risks associated with this transportation; return shipment to the customer will be at xg’s expense. Customer shall be responsible for return...

  • Page 55

    55 cn1100 access point - installation guide - g7601 - 3.8 to obtain warranty service or technical support, please contact the party from whom you purchased the product. If you purchased the product directly from xg, contact your xg sales representative or call 754-206-4800. To take advantage of this...

  • Page 56

    G7601 - release 3.8 © copyright xg technology, inc. 2016. All rights reserved . Xg technology, inc. 240 south pineapple avenue, suite 701 sarasota, fl 34236 (941) 953-9035 www.Xgtechnology.Com.