XG Technology CN3200-PS-2500-900-1-EXT Installation Manual - page 14
14
CN3200 Dual Band Routing Modem - Installation Guide - G7604 - Release 1.0
NOTE
Before clicking
Save
Changes
, be sure to write down the new settings, and then keep them in a safe
place for future reference:
SSID:
Security Key:
4.
In the
Wireless
Settings
area, enter a unique SSID for the device.
5.
Select a security protocol
:
1. Click the down arrow next to
Security
to display a drop down menu.
2. Click the desired security protocol. The best and most secure level of security is WPA2.
3. Enter the desired security key/passphrase in the
Shared
Key
field.
4. After confirming that the settings are written down, click
Save
Changes
.
xG Technology strongly recommends that you change the User Password.
6.
To change the
User Password
, on the right side of the menu bar, click
Admin
.
NOTES
The Password is case sensitive.
Before pressing
Enter
, be sure to write down the new password for future reference:
New Password:
Enter the
User Password
, and then click
Enter
.
The message
User password was successfully updated
is displayed.
7.
At the bottom of the page, click
Save Changes
, and then on the right side of the menu bar,
click
Logout
to complete the configuration process.
1.
In the browser address line, enter the IP address to open the management window:
CN3200 Modem WiFi Network Management
WiFi Network IP Address:
http://192.168.88.1
The first time the interface opens, a warning displays that no password is set.
xG Technology strongly recommends that you create a Password.
2.
Click
Go to password configuration…
in the message box at the top of the window.