- DL manuals
- XG Technology
- Network Router
- CN3200
- Installation and configuration manual
XG Technology CN3200 Installation and configuration manual
Summary of CN3200
Page 1
G7603 - release 3.3.
Page 2
2 cn3200 access point - installation guide - g7604 - release 3.3 product features and specifications are subject to change without prior notice. Xg® and xmax® are registered trademarks of xg technology, inc. All other trademarks used herein are property of their respective owners. For the latest pro...
Page 3: Table of Contents
3 cn3200 access point - installation guide - g7604 - release 3.3 table of contents introduction ............................................................................................................... 7 about this product ..........................................................................
Page 4
4 cn3200 access point - installation guide - g7604 - release 3.3 u-bolts ............................................................................................................................................. 30 2.4 ghz panel antenna ...............................................................
Page 5: List Of Figures
5 cn3200 access point - installation guide - g7604 - release 3.3 list of figures figure 1 — antenna configuration ........................................................................................................... 18 figure 2 — cn3200 dual band routing modem parts checklist ....................
Page 6
6 cn3200 access point - installation guide - g7604 - release 3.3 this page intentionally left blank.
Page 7
7 cn3200 access point - installation guide - g7604 - release 3.3 the cn3200 dual band routing modem is an all-ip, high-capacity and high-performance wireless access point. It is waterproof and made to handle wide temperature ranges. The cn3200 modem is designed for installation in fixed locations su...
Page 8
8 cn3200 access point - installation guide - g7604 - release 3.3 the cn3200 dual band routing modem is a compact form-factor base station used for communicating wirelessly with xmod mobile hotspots. The xmax cn3200 modem is an all-ip, high- capacity, high-performance wireless access point that that ...
Page 9
9 cn3200 access point - installation guide - g7604 - release 3.3 the cn3200 modem features seven connectors: four external xmax antenna connectors (n-type / female) a connector for an external 2.4 ghz antenna (tnc-type / female) a weatherproof ethernet connector an unused connector top conne...
Page 10: Fcc Part 15 Requirement
10 cn3200 access point - installation guide - g7604 - release 3.3 these notices apply to the cn3200 dual band routing modem. be sure to read, understand and follow these instructions. heed all warnings. only use accessories and attachments specified by xg technology. keep a copy of these ins...
Page 11
11 cn3200 access point - installation guide - g7604 - release 3.3 note this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a r...
Page 12
12 cn3200 access point - installation guide - g7604 - release 3.3 both top tx rf ports, must be properly terminated before power (poe) is applied to the unit. Applying power without proper rf port termination might damage the unit and void the product warranty. Terminate before power up ethernet.
Page 13
13 cn3200 access point - installation guide - g7604 - release 3.3 these steps set up the cn3200 dual band routing modem for use. After completing these configuration steps, the cn3200 modem will be fully functional and ready for operation. The cn3200 modem will provide any internet-ready device the ...
Page 14
14 cn3200 access point - installation guide - g7604 - release 3.3 1. Use a laptop or desktop computer to configure the cn3200 modem. Ensure that the computer network adapter is configured to obtain an ip address automatically , and if dns servers are static, change the setting to obtain dns server a...
Page 15
15 cn3200 access point - installation guide - g7604 - release 3.3 enter the user password , and then click enter . The message user password was successfully updated is displayed. Note do not set or use the wifi option with the cn3200 modem. 5. At the bottom of the page, click save changes , and the...
Page 16
16 cn3200 access point - installation guide - g7604 - release 3.3 connect to the wifi access point 1. On thetool bar at the top of the window, hover over network and then click wifi on the drop down menu. 2. On the wireless overview page, click scan. All available cn1300 wifi access points display i...
Page 17
17 cn3200 access point - installation guide - g7604 - release 3.3 the cn3200 modem is a 2x4 mimo device with four antenna connectors — two tx/rx and two rx-only. all connectors are always used. omni, panel and sector antenna configurations are supported. for optimum performance, the cn3200 m...
Page 18
18 cn3200 access point - installation guide - g7604 - release 3.3 this is a typical tower-mounted cn3200 modem installation with a 2x4 mimo panel antenna. Important install the provided six (6) ferrite beads as shown by this marker in the wiring diagram. Xmax antenna 2.4 ghz antenna 110-240 vac, 50/...
Page 19
19 cn3200 access point - installation guide - g7604 - release 3.3 note xg technology recommends that the cn3200 dual band routing modem be configured on a bench before installing the device in the field. Please refer to the topic configuring the cn3200 dual band routing modem on page 13. This checkl...
Page 20
20 cn3200 access point - installation guide - g7604 - release 3.3 installation tool kit checklist 8 mm metric wrench 10 mm metric wrench 11 mm metric wrench cat 5 crimp tool digital inclinometer or magnetic angle locator magnetic compass or smart phone compass app colored weatherproof tape (if insta...
Page 21
21 cn3200 access point - installation guide - g7604 - release 3.3 xmax panel antenna and cables 2.4 ghz panel antenna with mounting bracket and cable poe++ power supply and ac power cord weatherproof ethernet kit ferrite beads (6) installation bracket and hardware cn3200 dual band routing modem.
Page 22
22 cn3200 access point - installation guide - g7604 - release 3.3 these steps outline the basic tasks required to complete a successful installation at each tower location. Specific steps will vary, depending upon the requirements of the system design and the conditions each site. Details regarding ...
Page 23
23 cn3200 access point - installation guide - g7604 - release 3.3 when installing multiple cn3200 dual band routing modem devices at a site, color code each sector. Use colored weatherproof tape on each end of each ethernet cable run, and then record the azimuth and tilt of each sector. Refer to the...
Page 24
24 cn3200 access point - installation guide - g7604 - release 3.3 antenna alignment correct orientation and tilt of the antennas is the most critical part of the installation. Alignment of the antennas consists of two steps, azimuth orientation (horizontal) and mechanical tilt adjustment (vertical)....
Page 25
25 cn3200 access point - installation guide - g7604 - release 3.3 this guide may assist in estimating the time required to complete each xmax cn3200 site installation. Every installation has its own unique requirements, specifications, and challenges. The provided activities and timelines are subjec...
Page 26
26 cn3200 access point - installation guide - g7604 - release 3.3 this checklist may be used to ensure the integrity and quality of the installation during a site inspection. Completion and quality control check list item description satisfactory completion notes all equipment installed per site pla...
Page 27
27 cn3200 access point - installation guide - g7604 - release 3.3 these steps outline the basic tasks required to complete a successful installation. Your specific steps will depend upon the requirements of your system design. When multiple antennas are installed on the tower, mast, or other support...
Page 28
28 cn3200 access point - installation guide - g7604 - release 3.3 5. Adjust the azimuth (horizontal orientation) of the 2.4 ghz antenna to a compass reading of 90° magnetic. 6. Measure and adjust the tilt of the antenna to 0° with an inclinometer positioned against the back of the antenna. Securely ...
Page 29
29 cn3200 access point - installation guide - g7604 - release 3.3 b a c d d c b a these steps outline the basic tasks required to prepare for a successful installation of the cn3200 dual band routing modem using the two provided panel antennas. These initial steps prepare the cn3200 for placement in...
Page 30
30 cn3200 access point - installation guide - g7604 - release 3.3 4. U-bolts locate the two supplied u-bolts, and then install them onto the mounting bracket, as shown. 5. 2.4 ghz panel antenna locate the supplied 2.4 ghz panel antenna and 24 inch cable. The cn3200 modem / xmax panel antenna array i...
Page 31
31 cn3200 access point - installation guide - g7604 - release 3.3 note the cn3200 modem / panel antenna array was previously prepared for installation, as shown in the topic cn3200 modem / xmax panel antenna assembly on page 29. 1. Identify the desired location and height for installation of the cn3...
Page 32
32 cn3200 access point - installation guide - g7604 - release 3.3 check the antenna positioning to ensure that the specified azimuths and tilts are correct, and readjust as necessary. Inspect the completed work to ensure all hardware is tight, antennas are level, hangers are properly fastened, prope...
Page 33
33 cn3200 access point - installation guide - g7604 - release 3.3 20. Connect the supplied ac power cord to the poe++ power supply. 21. Ensure that all connections are correct, and then plug the ac power cord into a 110 vac power source. Within approximately three minutes, the cn3200 modem initializ...
Page 34
34 cn3200 access point - installation guide - g7604 - release 3.3 important before you begin this step, it is assumed that the cn3200 dual band routing modem has been configured as described in the steps shown in the topic configuring the cn3200 dual band routing modem on page 13. These steps connec...
Page 35
35 cn3200 access point - installation guide - g7604 - release 3.3 a properly configured device, such as a pc or laptop computer, can be wired directly to the cn3200 dual band routing modem for internet access. 1. Configure the device network interface for dhcp operation. 2. Using an ethernet cable, ...
Page 36
36 cn3200 access point - installation guide - g7604 - release 3.3 xmax radio tx power output avg: range: 24 dbm in 1 db steps; (bpsk, qpsk, qam 16/64) receiver sensitivity -100 dbm bpsk/-90 dbm qam64 2.4 ghz radio operating parameters: 8.5 to 24 dbm, sensitivity @ -92 db; total throughput rated at 1...
Page 37
37 cn3200 access point - installation guide - g7604 - release 3.3 cn3200 dual band routing modem xg technology, inc. (“xg”) 240 south pineapple avenue, suite 701 sarasota, fl 34236 scope of the warranty unless a different period is specified for a particular hardware product, or in a sales agreement...
Page 38
38 cn3200 access point - installation guide - g7604 - release 3.3 customer is responsible for shipment to xg (or authorized service provider) and assumes all costs and risks associated with this transportation; return shipment to the customer will be at xg’s expense. Customer shall be responsible fo...
Page 39
39 cn3200 access point - installation guide - g7604 - release 3.3 obtaining service and support under warranty to obtain warranty service or technical support, please contact the party from whom you purchased the product. If you purchased the product directly from xg, contact your xg sales represent...
Page 40
G7603 - release 3.3 © copyright xg technology, inc. 2015. All rights reserved . Xg technology, inc. 240 south pineapple avenue, suite 701 sarasota, fl 34236 (941) 953-9035 www.Xgtechnology.Com.