Xiaomi yi car recorder insruction 1.Package included 2.Equipment parts notice:please use a genuine 8-64g micro sd card (class 10 or more, bounced read speed 80m / s above), otherwise it will cause the camera or the camera can not be interrupted..
3.Charging 3.5 m standard charging cable, car charger through the box. (charger specifications input: 12-24v output: 5v 2.1a).
4.Xiaomi yi car dvr connect with your phone (1)install xiaomi yi car dvr app scan the following two-dimensional code, download app, and follow the prompts to install successfully connected. Tips: you can also in the "app store" to download (phone system requires android 4.1 and above or iso 7.0) (2)...
(4)adsd* and instructions for use more features, instructions for use and the recorder installation instructions, find in xiaomi yi dvr app. 5.Basic instructions (1)power on / off power: press setup / power button.
Shutdown: press setup / power button (at low battery status indicator will display red) state of charge the boot: 10 seconds delay after power automatic shutdown (2) setting when turned on, press settings / power button to enter the setup menu image quality: the default 1920 x 1080 / 30fps, continuo...
Note: please insert the sd card, or video can not record or would be interrupt. (4)record after pressing the power switch button to enter recording mode and start recording. When the indicator is blinking, red dot will always be top of the screen flashes, press the record button will stop recording....
(5)playback press the playback button, the recorder will automatically enter the list of thumbnails of media, through the "left," right " selects the previous or next video. Playing press "ok" button to pause playback, colleagues and delete pop-up selection box play. Through the "left," right "butto...
6.Installation 1.Fixed suction cup bracket, and install fixed xiaomi yi dvr 2. The data line along the edge line of the car stuffed gap 3. Insert the cigarette lighter plug, charging cable link sucker proper use: 1. Clean the area below the rear-view mirror 2. Remove the protective film sucker 3. Pu...
