1 / 12 hf transceiver v1.1 copyright © 2014, xiegu, inc. All rights reserved x108 user’s manual xiegu tech.
2 / 12 important reminder: before operating the equipment, please read our operating manual carefully and keep the manual, so as not to lose. Security considerations: do not use equipment during a lightning storm. Damp-proof ! Don't illegal operations! Note rf high-voltage of antenna connector! Feat...
3 / 12 一、machine parameters basic parameters frequency range: receive: 0.5~30mhz（ continuous ） transmitting: all hf amateur bands including warc bands operating mode: ssb（j3e） cw （a1a） am （a3e） minimum frequency stepping : 1hz antenna impedance: 50Ω operating temperature range: -10℃ ~ +60℃ frequency...
4 / 12 二、 description of equipment 2.1 front panel description 2.2 rear panel description 1. So- 239 antenna jack . 2. Audio input / ptt input . 3. Audio output. 4. Cw key input. 5. Usb port. 6. Dc power input. 7. Ground connection. 1. Power switch / volume knob 2. Hand microphone socket 3. Display ...
5 / 12 2.3 microphone 1. Lock button/ press it unlock again 2. Ptt button 3. Up / down frequency/channel 4. Receiving indicator 5. Multifunction 6. Filter selection buttons 7. Mode selection button 8. No indication 9. No function 10. Memory write button 11. Frequency/channel switching button 12. Vfo...
6 / 12 3.2 menu functions: 【pre】switch receive preamp on or off. 【att】switch receive signal attenuator on or off. 【mode】select desired operating mode – cw/am/lsb/usb. 【agc】 select agc level – fast/slow/off. 【nb】 select nb level between 1 and 4. -------------------------------------------------------...
3.3 functions operating instructions 3.3.1: set the current operating frequency method 1: press the front panel up / dn button, move to the desired frequency step bit, then rotate the frequency knob to change the current frequency value. Method 2: on the multifunction digital microphone in hand, pre...
8 / 12 att will appear dark. The attenuator provides 10 db attenuation. 3.3.6: automatic gain control on/off press the frequency knob to switch the current menu page, then press [agc]. Agc options are fast or slow with the screen showing the current status. Press [agc] again to exit. 3.3.7: noise bl...
9 / 12 desired power setting and press [pow] to exit. 3.3.13: switching between frequency mode / channel mode press the frequency knob to switch the current menu page, then press [v/m]. Press this function key to move between frequency mode and channel mode. 3.3.14: move current channel to vfo press...
10 / 12 then press the corresponding number keys on the microphone to set the local time. 3.3.20: setting squelch level press the frequency knob to switch the current menu page, then press [sql]. Turn the frequency knob to set the squelch depth. Press [sql] again to save the squelch setting and exit...
11 / 12 【keyer】 telegraph key the telegraph key is automatic and manual integration. You can switch in the menu. 【usb】 pc control or firmware update 【dc in】 11-14.5 v dc input 【ground hole】 【ground screw】 3.5.Advanced menu settings caution: these settings are directly related to the correct operatio...
12 / 12 item 1 to 5, cannot be freely modified, otherwise it will lead to the transceiver exception or even not work. Item 6, for cw receiving side tone pitch adjustment. Users can according to their preferences and habits, adjusting cw side tone. Item 7, for cw transceiver delay. Users can operate ...
