XIEGU XPA125 Instruction Manual - page 7
XIEGU COMMUNICATIONS
7
⑹ Power amplifier status:
Displays the overall status of the power amplifier as a whole.
Indicates that bypass mode is selected, the power amplifier is switched out of
circuit.
Indicates that the power amplifier is operational.
RX
Indicates that the unit is in receive mode.
TX
Indicates that the unit is in the transmit mode.
⑺ Input power value:
Displays the power input value to the XPA125 in Watts.
⑻ Current working band status:
Displays the current working band, and whether automatic or manual mode
is selected.
(9)
Output power value:
Displays the output power being delivered by the XPA125 in Watts.
Automatic antenna tuner unit (ATU) status:
Displays the status of the automatic antenna tuner.
Indicates that the XPA125 is not connected to the automatic antenna tuner
unit.
Indicates that the XPA125 is connected to the automatic antenna tuner unit.
When tuning is successful,【INUSE】will be displayed.
If tuning fails,【Fail】will be displayed.
(10)