XiNCOM Twin WAN XC-DPG503 User Manual - page 101
Other manuals for Twin WAN XC-DPG503:
User Manual
Manual is about: XiNCOM Twin WAN XC-DPG502: User Guide
of
108
Twin WAN Series – User Guide | v1
Section 3: Restoring Factory Defaults
When the
Restore Factory Defaults
button on the Status screen above is clicked, the
following screen is displayed.
If the
Restore Default Value
button on this screen is clicked, the following actions will
occur:
•
ALL of your settings will be erased.
•
The default IP address, password and ALL other settings will be restored to
the factory default values.
•
The DCHP server function will be enabled.
These changes may yield your current connection to the Twin WAN Gateway to be
invalid and you will have to re-connect to the gateway using its default IP address
(192.168.1.1).
Copyright © 2005 WINS International, LLC dba XiNCOM | All rights reserved.
100