XINDAK CA-1 Instructions Manual - page 7
30
°
30
°
IR Sensoer
SLEEP
HEATING
5
Remote Control Unit
S - 1
S -2
S -3
S -4
B- 1
Mute
F1
Volume
-
+
5
4
2
3
1
5
2
3
1
4
Mute Button
F1 Sleep Button
Input Switch Button
Balance Input Switch Button
Volume Control Button
Install Batteries
1. Use the tool remove the rear cover of the remote control unit.
2. Install the 2 batteries (AAA)
polarity.
with correct +/
-
3. Reinstall the rear cover of the remote control unit.
Battery Replacement
1. Install batteries observing the correct polarity,(+) and (-).
2. Do not use new and old batteries simultaneously.
3. Batteries with similar shapes may have different rated voltages Be sure to
use the correct batteries.
4. Remove batteries from the remote control unit if it will not be used for a long
period of time.
Using Remote Controller
If you use the remote control unit to control the amplifier:
1.The remote control range is approximately 5 meters.
2.Pointing the remote control on an angle to the receiver, will shorten the
useful distance of the remote control.
S - 1
S -2
S -3
S -4
B- 1
Mute
Temp
Volume
-
+
R E
M O
T E C
O N
T R
O L
L E
R
AAA
AAA
!
Incorrect use of batteries can cause corrosion or damage.
The lower temperature, the shorter battery life.
Operation and maintenance for remote control