XINDAK XA8800MNu Instructions Manual - Introduction
of
10
4
u
u v
The power supply on-off button
Press this button, the current will be put through; press it again, the current will be cut off.
u
v
Power Indicator
After getting through, this indicator will wink for 8 seconds and then light.
u
Balance signal input jack
Connect the input signal by the balanced signal cable.
v
The speaker binding post
Connect it to the speaker by the speaker cable.
w
Signal input jack
Connect the input signal by signal cable.
x
Signal Input Switch
Switch between the coaxial and balance input channel
y
Power supply input jack and safety cutout jack
Connect it to the power supply by attached power cord.
Introduction
Chapter 2
2.3 Rear Panel
2.2 Front Panel
XA8800MNu
POWER
x
v w y
NO.: