Xineron XIN-MPC-0110 Quick Installation Manual

Manual is about: HD Mini Cube

Summary of XIN-MPC-0110

  • Page 1

    Quick installation guide please read this manual thoroughly before use, and keep it handy for future reference. Hd mini cube network camera.

  • Page 2

    2 1. Description the network camera supports the network service for a sensor image with progressive scan, which can be monitored on a real-time screen regardless of distances and locations. By using its dedicated program, many users are able to have an access to the network camera at once or a sing...

  • Page 3

    3 • installation steps follow these steps to install the network camera on your local network (lan): 1. Check the package contents against the list below. 2. Connect the network camera. See page 5. 3. Set an ip address. See page 6. 4. Set the password. See page 9. • package component the system come...

  • Page 4

    4 • rear view no name description 1 pir sensor xin-mpc-0110/xin-mpc-0110w is equipped with a pir sensor that has a maximum range of 5 meters for detecting movement in the dark. 2 microphone/speaker xin-mpc-0110/xin-mpc-0110w is equipped with a microphone and speaker. Two-way audio support allows for...

  • Page 5

    5 2. Installation 2.1 connection • connecting to the rj-45 connect a standard rj-45 cable to the network port of the network camera. Generally a cross-over cable is used for directly connection to pc, while a direct cable is used for connection to a hub. L micro sd memory slot insert the sd memory ...

  • Page 6

    6 notes: 1. Wps may not work if your ap is configured with a "hidden" ssid. 2. If any wps-enabled ap is not detected, the camera will search aps for 60 seconds after pressing the wps button, and if the camera still can not detect an ap after 1 minute, the wireless setup will be cancelled. 3. If a ca...

  • Page 7

    7 3. Select the camera on the list and click right button of the mouse. You can see the pop-up menu below. 4. Select assign ip. You cam see a assign ip window. Enter the required ip address. Note: for more information, refer to the smart manger user’s manual..

  • Page 8: 3. Operation

    8 3. Operation the network camera can be used with windows operating system and browsers. The recommended browsers are internet explorer, safari, firefox, opera and google chrome with windows. Note: to view streaming video in microsoft internet explorer, set your browser to allow activex controls. 3...

  • Page 9

    9 3.2. Access from the internet access from the internet once connected, the network camera is accessible on your local network (lan). To access the network camera from the internet you must configure your broadband router to allow incoming data traffic to the network camera. To do this, enable the ...

  • Page 10

    10 the resolution drop-down list allows you to select the most suitable one out of video resolutions to be displayed on live view page. The protocol drop-down list allows you to select which combination of protocols and methods to use depends on your viewing requirements, and on the properties of yo...

  • Page 11

    11 when accessing the network camera for the first time, the “admin password” dialog appears. Enter your admin name and password, set by the administrator. Note: if the password is lost, the network camera must be reset to the factory default settings. See “3.6 resetting to the factory default setti...

  • Page 12: Hd Mini Cube

    12 hd mini cube network camera printed in korea.