Xineron XIN-PD-0585 Instruction Manual

Manual is about: DNR Super High Resolution Day & Night Color

Summary of XIN-PD-0585

  • Page 1

    Dnr super high resolution day & night color camera 3-axis indoor dome camera please read this manual thoroughly before use, and keep it handy for future reference. Instruction manual.

  • Page 2: Warning

    Ii warning to reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Do not insert any metallic object through the ventilation grills or other openings on the equipment. Explanation of graphical symbols the lightning flash with arrowhead symbol, within an equilate...

  • Page 3

    Iii important safety instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s i...

  • Page 4: Fcc Compliance Statement

    Iv fcc compliance statement ce compliance statement warning: this is a class a product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. This device complies with part 15 of the fcc rules. Operation is subject to th...

  • Page 5: Contents Of Package

    V contents of package installation of the camera must be performed by qualified service personnel in accordance with all local and national electrical and mechanical codes. Carefully remove the color camera and its accessories from the carton and verify that they were not damaged in shipment. The co...

  • Page 6: Table Of Contents

    Vi table of contents introduction ----------------------------------------------------------------------------------------- 1 camera connection & contensts of package ------------------------------------- 2 installation --------------------------------------------------------------------------------...

  • Page 7: Introduction

    1 introduction the camera provides high-quality images using sony 1/3” ccd and digital signal process lsis. Features: ● 1/3" had ccd Ⅱ for an image of high sensitivity ● 2.8~12 mm d/n vari-focal(dc ai) ● digital wide dynamic range ( adaptive tone reproduction) ● excellent picture quality ● 700 lines...

  • Page 8: Camera Connection

    2 camera connection 1. Lens : 2.8~12mm d/n vari-focal(dc ai) for wide area monitoring 2. Power : power source from a dc 12v or ac 24v 3. Video : bnc connector used to connect the camera to a monitor, switcher.Ect. 4. Utp out contents of package.

  • Page 9

    3.

  • Page 10

    4.

  • Page 11

    5.

  • Page 12

    6.

  • Page 13: Osd Menu Structure

    7 osd menu structure setup menu (page 1) lens shutter/agc white bal backlight pict adjust atr motion det next (page2) exit save all lens auto ↵ manual white balance atw ↵ push user 1↵ user 2↵ anti cr manual↵ push lock backlight off blc hlc picture adjust↵ mirror brightness contrast sharpness hue gai...

  • Page 14

    8 setup menu (page 2) privacy day/night nr camera id language camera reset back (page 1) exit save all privacy off on↵ day/night color b/w↵ nr↵ nr mode y level c level return camera id off on↵ language english 日本語 deutsch francais pyccknn portugues espanol camera reset (return the camera to factory ...

  • Page 15: Lens

    9 lens auto type (dc / video) sets the type of mechanical iris (video lens is not supported) mode (auto / open / close ) sets the type of control to be applied over the mechanical iris. Speed (0 – 255) sets the convergence speed of the mechanical iris. Manual manual lens only . (note since manual mo...

  • Page 16: White Bal

    10 white bal atw (auto trace white balance) speed (0~255) adjusts the pull-in speed of atw. Delay cnt (0~255) sets the time-based hysteresis of atw. Atw frame (x0.5 / x1 / x1.5 / x2) sets the pull-in frame magnification. Enviroment (indoor / outdoor) preset for either indoor or outdoor applications ...

  • Page 17: Atr

    11 atr atr (adaptive tone reproduction) allows adjustment of the image to assist with widely contrasting scenes of view. Luminance (low / mid / high) sets the extent of the luminance compression contrast (low / midlow / mid / midhigh / high) sets the extent of the contrast enhancement motion det det...

  • Page 18: Day / Night

    12 left (ntsc:0~474 , pal:0~468) 0 = left right (ntsc:0~474 , pal:0~468) 474(468) = right color (1~8) sets the colors of the privacy zones. Transp (0.00 / 0.50 / 0.75 / 1.00) sets the transparency of the privacy zone area if color is selected. Mosaic (off / on) sets the mosaic function as the privac...

  • Page 19: Camera Id

    13 camera id sets the camera id to on or off. A title of 52 characters per line can be applied. Clr inserts a space pos allows you adjust the location of the camera id title display. (if you move too much right side or down, it might lose id on the screen) language language select between: english, ...

  • Page 20: Auto White Defect

    14 auto white defect push the left button for 5 seconds and enter auto white defect menu. Cover the lens and enter for starting. If white defects are over 65pcs, the camera is faulty and auto defect is useless. Lens adjustment (optional varifocal lens) lens 2.8 ~ 12mm image size 1/3’’ ccd focal leng...

  • Page 21: External Dimension

    15 external dimension.

  • Page 22: Speccifications

    16 speccifications model ntsc pal power source dc 12v / ac 24v±10% power power consumption 3.5 watts (300ma ) image sensor 1/3″ sony had ccd ii total pixels 1020(h) x 508(v) 1020(h) x 596(v) effective pixels 976(h)x494(v) 976(h)x582(v) scanning system 2:1 interlace scanning frequency 15.734khz(h) x ...

  • Page 24

    2 50303675a.