Demolition hammer model: xp-g65bh handling instructions with active vibration reducing system original instructions though these handling instructions. Ensure that you know how the machine works, and how it should be operated. Maintain the machine in accordance with the instructions, and make certai...
2 application this hammer should be applied to breaking concrete, chipping off concrete, grooving, bar cutting, and driving piles in installation of piping and wiring, unitary facility installation, machinery installation water supply, and drainage work, interior jobs, harbor facilities and other ci...
3 proper measures include among others regular maintenance and care of the power tool and application tools, keeping hands warm, periodical breaks and proper planning of work processes. Standard accessories hexagon bar wrench 6mm(for m8) 1 piece hexagon bar wrench 5mm(for m6) 1 piece hexagon bar wre...
4 4. Scoop hexagon size28*410 length (unit: mm) 5. Bush hammer heads + shank hexagon size28*410 length (unit: mm) tooth distance: 12mm tooth high: 8mm length*width: 60*60mm 6. Tamping plate + shank hexagon size28*394 length (unit: mm) length*width: 150*150mm 7. Big flat spade+ shank hexagon size28*2...
5 9. Lubricate oil one bottle(60g) in this operator's manual/or machine’s labels following symbols are used: read the manual carefully accordance with essential applicable safety of european directives double insulation denote risk of personal injury, loss of lifeor damage to the toolin case of nono...
6 general power tool safety warnings warning ： read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refer...
7 switch on invites accidents. D) remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. E) do not overreach. Keep proper footing and balance at all times. This enables better control of...
8 • wear a dust mask. Additional safety rules: 1. Wear a hard hat (safety helmet), safety glasses and /or face shield. It is also highly recommended that you wear a dust mask, ear protectors and thickly padded gloves. 2、be sure the bit is secured in place before operation. 3. Under normal operation,...
9 name of the parts 1 retainer 2 head cover 3 aluminum head 4 second handle 5 fan cover 6 encloser 7 switch 8 main handle mounting tool bits warning: before do it, make sure unplug the machine! (1) pull out of the retainer "2", turning 180℃ clockwise or anticlockwise, insert the accessory shank port...
10 1 accessory 2 retainer pull out and eurn+/-180 remarking: when you removing the accessory, such as a bull point, a cutter etc.., follow above procedure in reverse order. Prior to operation 1. Power source ensure that the power source to be utilized conforms to the power requirements which specifi...
11 counteract the reaction. Note: sometimes the power tool does not begin the striking the stroke even the motor keep running, because oil inside become thick. If the power tool is used at a low temperature, or it is used after a long idle time, this demolition hammer should be kept running for abov...
12 1. Loosen the 4 screws between aluminum head and gear box by 6 mm hex head wrench.(see fig1) 2. Disassemble the aluminum head, cylinder and piston.(see fig2) 3. Clean the inside of aluminum head, must be free of metal chip and granular dust (see fig3) 4. Clean the piston and cylinder.(see fig4) a...
13 water and oil to wet it. 5. Carbon brush replacements carbon brushes are consumable parts, when it becomes worn or "limit worn" it can cause motor trouble, we use auto-stop carbon brush, it stopped automatically when carbon brush worn out, at that time, replace a new couple of them as following p...
14 ec declaration of conformity we herewith declare, zhejiang xinpu industrial & commercial co., ltd. 106 no. 330 national road, huajie industrial zone, yongkang, zhejiang 321300, p. R. China that the following machine complies with the appropriate basic safety and health requirements of the ec dire...
15.
16.
