1. DL manuals
  2. Xinpu
  3. Rotary Hammer
  4. XP-R26B
  5. Handling Instructions Manual

Xinpu XP-R26B Handling Instructions Manual

Summary of XP-R26B

  • Page 1

    Rotary hammer model: xp-r26b handling instructions original instructions before using this xinpu rotary hammer, please carefully read though these handling instructions. Ensure that you know how the machine works, and how it should be operated. Maintain the machine in accordance with the instruction...

  • Page 2

    1 2 3 4 5 6 7 8 9 10 11 12 13 14 15.

  • Page 3: Iist:

    16 (1) drill bit (2) part of sds-plus shank (3) turn staff armor (4) flex sheath (5) switch reversing bar (6) function knob (7) locked pushbutton (8) drill chuck (9) drill chuck shank (10) auxiliary handle (11) staff gauge (12) mounting hole (13) core bit (14) core bit shank (15) thread (16) drill b...

  • Page 4

    General power tool safety warnings warning ： read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refer t...

  • Page 5

    Medication. A moment of inattention while operating power tools may result in serious personal injury. B) use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal ...

  • Page 6: 2. Safety Instructions

    Conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation. 5) service a) have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power ...

  • Page 7: Specifications

    Indicate electrical shock hazard. Immediately unplug the plug from the main electricity in the case that the cord gets damage and during maintenance. Wear ear and eye protection. Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric sho...

  • Page 8

    Optional accessories (sold separately) 1. Through-hole drilling (rotation + hammering) drill bit (sds-plus) outer diameter (mm) overall length(mm ) 8 280 10 280 12 280 14 280 16 400 18 400 20 400 22 400 25 400 2. Large dia. Hole boring (rotation + hammering ) + + (1)drill bit (2) core bit (3) core b...

  • Page 9: Applications

    6. Drilling holes (rotation only) + + bolt drill chuck drill chuck shank(sds-plus shank) drill chuck key { drill chuck ass’y (includes drill chuck key) and chuck (for drilling in steel or wood). 7. Hammer grease（30g） optional accessories are subject to change without notice. Applications rotation an...

  • Page 10: How to Use The Rotary Hammer

    (1) clean and lightly grease the shank portion of the drill bit. (2) insert the drill bit in a twisting manner into the tool holder until it latches itself (fig.1) (3) pull the drill bit to make sure it is locked completely. (4) to remover the drill bit, fully pull the flex sheath in the direction o...

  • Page 11: How to Handle A Core Bit

    To drill wood or metal material using the drill chuck and drill chuck shank (optional accessories), proceed as follows. Installing drill chuck and drill chuck shank (fig.7). (1) attach the drill chuck to the drill chuck shank. (2) insert the drill chuck shank sds-plus in a twisting manner into the t...

  • Page 12: How to Replace Grease

    2. Hoe to bore (1) connect the plug to the power source. (2) mount the core bit shank on the main body in the same manner as in mounting the drill bit and the bull point. (fig. 15) (3) when the hole depth reaches approximately 5mm, the hole position can be determined. Then remove the dill bit from t...

  • Page 13

    5. Replacing a carbon brush when the carbon brushes are worn out, the power tool switches itself off. The power tool must then be sent to an after-sales service agent. When you have to replacement the carbon brushes by yourself, please following the order： disassembling (1) loosen the five screws on...