1. DL manuals
  2. Xinpu
  3. Rotary Hammer
  4. XP-R30VA
  5. Handling Instructions Manual

Xinpu XP-R30VA Handling Instructions Manual

Summary of XP-R30VA

  • Page 1

    1 rotary hammer model: xp-r30va handling instructions original instructions before using this xinpu rotary hammer, please carefully read though these handling instructions. Ensure that you know how the machine works, and how it should be operated. Maintain the machine in accordance with the instruct...

  • Page 2

    2 1 2 3 4 5 6 7 8 9 10 11 12 13 14.

  • Page 3: Iist:

    3 (1) drill bit (2) part of sds plus shank (3) turn staff armor (4) flex sheath (5) power source indicator and carbon brushes indicator (6) speed adjuster knob (7) locked pushbutton (8) function knob (9) cover (10) orientation staff guage (11) papilionaceous short bolt (12) core bit (13) core bit sh...

  • Page 4

    4 c) keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2) electrical safety a) power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and ma...

  • Page 5

    5 4) power tool use and care a) do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. B) do not(use the power tool if the switch does not turn it on and off. Any power tool that can...

  • Page 6: Specifications

    6 of an electric shock. Warning: reduce the working time to avoid risks related with too much vibration. In this operator's manual/or machine’s labels following symbols are used: accordance with essential applicable safety of european directives double insulation denote risk of personal injury, loss...

  • Page 7: Standard Accessories

    7 standard accessories (1) carbon brush (6*10*14mm) …… …………………………………………….. 1 (2) hammer grease ……………………………………… ……………………… 1 (3) auxiliary handle…………………………………………………………………1 (4) staff guage……………………………………….…………………….………...1 standard accessories are subject to change without notice. Optional accessories (s...

  • Page 8: Applications

    8 applications ○ drilling holes in concrete ○ drilling anchor holes ○ crushing concrete, chipping, digging, and squaring (by applying optional accessories) operation 1. Power source ensure that the power source to be utilized conforms to the power requirements specified on the product nameplate. 2. ...

  • Page 9: How to Use The Rotary Hammer

    9 how to use the rotary hammer caution: to prevent accidents, make sure to turn the switch off and disconnect the plug from the receptacle when the drill bits and other various parts are installed or removed. The power switch should also be turned off during a work break and after work. 1.Switch ope...

  • Page 10: How to Handle A Core Bit

    10 4. Install the orientation staff guage (fig.6) (1) loosen the papilionaceous short bolt on the auxiliary handle, and insert the staff gauge into the mounting hole on the side handle. (2) adjust the staff gauge position according to the depth of the hole and tighten the papilionaceous short bolt s...

  • Page 11: Maintenance and Inspection

    11 caution: a special grease is used with this machine, therefore, the normal performance of the machine may be badly affected by use of other grease. Please be sure to let one of our service agents undertake replacement of the grease. When you have to replacement the grease by yourself, please foll...

  • Page 12

    12 modifications: xinpu power tools are constantly being improved and modified to incorporate the latest technological advancements. Accordingly, some parts (i.E. Code numbers and/or design) may be changed without prior notice. Note: due xinpu’s continuing program of research and development, the sp...

  • Page 13

    13.

  • Page 14

    14.