Summary of -Q01 LEOPARD
Page 1
Micro-ip camera type cube xip-q01 leopard user ’s manual ver. 1.2.
Page 2: Table Of Contents
1 table of contents 1. Overview ................................................................................................................................ 2 1.1 features ...................................................................................................................... 2 1.2...
Page 3: Overview
2 1. Overview the micro-camera ip type bucket full hd leopard, camera is an easy setup camera with poe supported to reduce complicate cabling. The ip camera has built-in microphone and speaker which allows two-way audio communication. 2 megapixel resolution is supported for providing high definition...
Page 4: 1.2
3 1.2 package contents please check the package contains the following items listed below. Full hd multiple stream micro-camera ip leopard (poe) quick guide cd (bundled software and documentation).
Page 5: 1.3
4 1.3 dimensions the dimensions of the ip camera are shown below..
Page 6: 1.4
5 1.4 connectors the diagrams below show the connectors of the ip camera. Definition for each connector is also given as follows. No. Connector definition 1 poe network for ethernet cable and pse connection 2 network leds network connection and activity indication 3 dc 12v connector for power connec...
Page 7: Camera Cabling
6 2. Camera cabling please follow the instructions below to complete ip camera connection. 2.1 connect power for power connection, please refer to section connectors . Alternatively, users can power the camera by poe. Use an ethernet cable and connect it to the camera and a poe switch. Note: if poe ...
Page 8: System Requirements
7 3. System requirements to perform the ip camera via web browser, please ensure the pc is in good network connection, and meet system requirements as described below. Items system requirement personal computer 1. Intel ® pentium ® m, 2.16 ghz or intel ® core tm 2 duo, 2.0 ghz 2. 2 gb ram or more op...
Page 9: Access Camera
8 4. Access camera for initial access to the ip camera, users can search the camera through the installer program: devicesearch.Exe, which can be found in “devicesearch” folder in the supplied cd. Accessing the camera by device search software step 1: double click on the program device search.Exe. S...
Page 10
9 step 8: a prompt window requesting for default username and password will appear. Enter the default username and password shown below to login to the camera. Login id password admin 1234 note: id and password are case sensitive. Note: it is strongly advised that administrator’s password be altered...
Page 11
10 once the dc viewer is successfully installed , the ip camera’s home page will be able to correctly display as the figure below. Note: please refer to full hd multiple stream ip camera menu tree for more button function detail..
Page 12: Setup Video Resolution
11 5. Setup video resolution users can setup video resolution on the video format page of the user-friendly browser-based configuration interface. Video format can be found under this path: streaming> video format. The default value of video resolution is as below. 2m h.264- 1920 x 1080 (30 fps) + h...
Page 13
12 6. Configuration files export / import to export / import configuration files, users can access the maintenance page on the user-friendly browser-based configuration interface. The maintenance setting can be found under this path: system> maintenance. Users can export configuration files to a spe...
Page 14
13 appendix a: technical specifications camera 2m image sensor 1/2.7” progressive cmos effective pixels 1920 (h) x 1080 (v) minimum illumination tbd white balance manual / awb / atw shutter speed 1 ~ 1/10000 sec. Lens focal length 2.8 mm / 3.6 mm / 4.0 mm f number 2.8 mm- f2.0 / 3.6 mm- f1.8 / 4.0 m...
Page 15
14 power dc jack ethernet rj-45 general operating temperature -10°c ~ 50°c (14°f ~ 122°f) humidity 10% ~ 90%, no condensation dimension 96.5 x 56.0 x 61.4 mm (3.8 x 2.2 x 2.4 in.) weight 120 g power source poe / dc 12v power consumption system 3 w built-in ir illuminator +0.8 w regulatory ce / fcc /...
Page 16
15 camera 2m real-time image sensor 1/2.7” progressive cmos effective pixels 1920 (h) x 1080 (v) minimum illumination tbd white balance manual / awb / atw shutter speed 1 ~ 1/10000 sec. Lens focal length 2.8 mm / 3.6 mm / 4.0mm f number 2.8mm- f2.0 / 3.6 mm- f1.8 / 4.0mm- f1.5 operation multiple lan...
Page 17
16 general operating temperature -10°c ~ 50°c (14°f ~ 122°f) humidity 10% ~ 90%, no condensation dimension 96.5 x 56.0 x 61.4 mm (3.8 x 2.2 x 2.4 in.) weight 120 g power source poe / dc 12v power consumption system 3 w built-in ir illuminator +0.8 w regulatory ce / fcc / rohs (*) optional.
Page 18
17 appendix b: delete the existing dc viewer for users who have installed dc viewer in the pc previously, please first remove the existing dc viewer from the pc before accessing to the ip camera. Deleting the dc viewer in the windows , activate , and then double click on remove programs>. In the lis...
Page 19
18 appendix c: setup internet security if activex control installation is blocked, please either set internet security level to default or change activex controls and plug-ins settings. Internet security level: default step 1: start the internet explorer (ie). Step 2: click on the tab on the menu ba...