1. DL manuals
  2. Xirrus
  3. Wireless Access Point
  4. X2120
  5. Quick Installation Manual

Xirrus X2120 Quick Installation Manual

Manual is about: X2 and XD2 Series

Summary of X2120

  • Page 1

    Wireless access point x2 and xd2 series quick installation guide xd4 series august 8, 2015.

  • Page 2

    Is a registered trademark of xirrus, inc. All other trademarks and brand names are marks of their respective holders. Please see legal notices, warnings, compliance statements, and warranty and license agreements in the xirrus wireless ap user’s guide. All rights reserved. This document may not be r...

  • Page 3

    X2 and xd2 two-radio access points 1 quick installation guide for x2 and xd2 series models x2 and xd2 series access points (aps) are new classes of aps within the xirrus wireless portfolio. With two omnidirectional 802.11ac radios, a powerful integrated controller, application-level intelligence, an...

  • Page 4

    X2 and xd2 two-radio access points 2 all xirrus xd2 aps are type 2, class 4 poe-802.3at devices. If your switch vendor provides a setting for the type of powered-device detection with options such as legacy, 4-point, or both, set the port to both or 4-point. Do not use settings intended for legacy d...

  • Page 5

    X2 and xd2 two-radio access points 3 install mounting hardware and ap 3a—ceiling mount with mounting plate the following steps use a mounting plate, which offers a more secure mount, ease of dismount, and a locking option for the ap. 3b—ceiling grid mount with mounting plate 1. For t-bar clips, use ...

  • Page 6

    X2 and xd2 two-radio access points 4 3c—wall mount with bracket note: the mounting location must be able to support the weight of the ap and the mounting bracket (about 2 lb. Total). Connect cables and install ap 1. If the ap mounting plate has a metal locking plate, remove it. Align the three holes...

  • Page 7

    X2 and xd2 two-radio access points 5 6. You may remove the ap by pushing it up against the mounting plate and rotating to the left. Zero-touch provisioning and ongoing management most customers employ the xirrus management system (xms) for the initial setup and continuing management of xirrus device...

  • Page 8

    X2 and xd2 two-radio access points 6 using the reset button the reset button returns the ap to factory default settings while rebooting. It is located on the bottom of the unit. Use the reset button as follows: unplug the cable from the gig1/poe port. Press the reset button all the way (there should...

  • Page 9

    X2 and xd2 two-radio access points 7 direct mounting template.

  • Page 10

    1.800.947.7871 toll free in the us +1.805.262.1600 sales +1.805.262.1601 fax 2101 corporate center drive thousand oaks, ca 91320, usa to learn more visit: xirrus.Com or email info@xirrus.Com © 201 xirrus, inc. All rights reserved. The xirrus logo is a registered trademark of xirrus, inc. All other t...

  • Page 11: Series Only)

    Wireless access point 539 appendix c: notices (xd and xr500/600 series only) this appendix contains the following information: “notices” on page 539 “eu directive 1999/5/ec compliance information” on page 546 “compliance information (non-eu)” on page 553 “safety warnings” on page 555 “translated saf...

  • Page 12

    Wireless access point 540 installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi...

  • Page 13

    Wireless access point 541 rf exposure requirements, this device must be installed in a location where the antennas of the device will have a minimum distance of at least 30 cm (12 inches) from all persons, except that xd2 models must have a minimum distance of at least 20 cm (8 inches) from all pers...

  • Page 14

    Wireless access point 542 industry canada statement (xd2) this device complies with industry canada license-exempt rss standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interferen...

  • Page 15

    Wireless access point 543 users should also be advised that high-power radars are allocated as primary users (i.E. Priority users) of the bands 5250-5350 mhz and 5650-5850 mhz and that these radars could cause interference and/or damage to le-lan devices. de plus, les utilisateurs devraient aussi ê...

  • Page 16

    Wireless access point 544 industry canada statement (non-xd2) this device complies with rss-210 of the industry canada rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including...

  • Page 17

    Wireless access point 545 les bandes 5 250-5 350 mhz et 5 650-5 850 mhz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs lan-el. Important note: ic radiation exposure statement: to ensure compliance with industry canada rf exposure requirements, this device must b...

  • Page 18

    Wireless access point 546 eu directive 1999/5/ec compliance information this section contains compliance information for the xirrus wireless ap family of products. The compliance information contained in this section is relevant to the european union and other countries that have implemented the eu ...

  • Page 19

    Wireless access point 547 français [french] cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/ec. ĺ slenska [icelandic] Þetta tæki er samkvæmt grunnkröfum og öðrum viðeigandi ákvæðum tilskipunar 1999/5/ec. Italiano [italian] questo app...

  • Page 20

    Wireless access point 548 assessment criteria the following standards were applied during the assessment of the product against the requirements of the directive 1999/5/ec: radio: en 301 893 and en 300 328 (if applicable) emc: en 301 489-1 and en 301 489-17 safety: en 50371 to en 50385 and en 60601 ...

  • Page 21

    Wireless access point 549 weee compliance natural resources were used in the production of this equipment. This equipment may contain hazardous substances that could impact the health of the environment. In order to avoid harm to the environment and consumption of natural resources, we encourage you...

  • Page 22

    Wireless access point 550 national restrictions in the majority of the eu and other european countries, the 2.4 ghz and 5 ghz bands have been made available for the use of wireless lans. The following table provides an overview of the regulatory requirements in general that are applicable for the 2....

  • Page 23

    Wireless access point 551 les liasons sans fil pour une utilisation en extérieur d’une distance supérieure à 300 mèters doivent être notifiées à l’institut belge des services postaux et des télécommunications (ibpt). Visitez www.Bipt.Be pour de plus amples détails. Greece a license from eett is requ...

  • Page 24

    Wireless access point 552 antennas the xirrus wireless ap employs integrated antennas that cannot be removed and which are not user accessible. Nevertheless, as regulatory limits are not the same throughout the eu, users may need to adjust the conducted power setting for the radio to meet the eirp l...

  • Page 25

    Wireless access point 553 compliance information (non-eu) this section contains compliance information for the xirrus wireless ap family of products. The compliance information contained in this section is relevant to the listed countries (outside of the european union and other countries that have ...

  • Page 26

    Wireless access point 554 declaration of conformity mexico xr-520: dictamen #: 1402d00742 xr-600: dictamen #: 1402ce08098 xr-520: cofetel cert #: rcpxixr13-1003 thailand this telecommunication equipment conforms to ntc technical requirement..

  • Page 27

    Wireless access point 555 safety warnings translated safety warnings appear on the following page. This appendix contains notices, warnings, and compliance information for the xd and xr500/600 series only. For other models, see the notes under “notices (xr-1000 to xr-6000 indoor models)” on page 563...

  • Page 28

    Wireless access point 556 translated safety warnings avertissements de sécurité this appendix contains notices, warnings, and compliance information for the xd and xr500/600 series only. For other models, see the notes under “notices (xr-1000 to xr-6000 indoor models)” on page 563. ! Sécurité lisez ...

  • Page 29

    Wireless access point 557 software license and product warranty agreement this software license agreement (the “agreement”) is a legal agreement between you (“customer”) and licensor (as defined below) and governs the use of the software installed on the product (as defined below). If you are an emp...

  • Page 30

    Wireless access point 558 the product in accordance with the accompanying documentation and for no other purpose. 2.2 ownership. The license granted under sections 2.1 above with respect to the software does not constitute a transfer or sale of licensor's or its suppliers' ownership interest in or t...

  • Page 31

    Wireless access point 559 3.0 limited warranty and limitation of liability 3.1 limited warranty & exclusions. Licensor warrants that the software will perform in substantial accordance with the specifications therefore set forth in the documentation for a period of ninety [90] days after customer's ...

  • Page 32

    Wireless access point 560 3.4 limitation of liability. (a) total liability. Notwithstanding anything else herein, all liability of licensor and its suppliers under this agreement shall be limited to the amount paid by customer for the relevant software, or portion thereof, that gave rise to such lia...

  • Page 33

    Wireless access point 561 protective of a party's right in such confidential information as those set forth herein. 4.2 return of materials. Customer agrees to (i) destroy all confidential information (including deleting any and all copies contained on any of customer's designated hardware or the pr...

  • Page 34

    Wireless access point 562 6. Miscellaneous if customer is a corporation, partnership or similar entity, then the license to the software and documentation that is granted under this agreement is expressly conditioned upon and customer represents and warrants to licensor that the person accepting the...

  • Page 35

    Wireless access point 563 hardware warranty agreement please read this agreement carefully before using this product by using this product, you acknowledge that you have read and understood all the terms and conditions of this agreement and that you are consenting to be bound by this agreement. If y...

  • Page 36

    Wireless access point 564 whether in contract, tort (including negligence), or otherwise, exceed the price paid by customer. The foregoing limitations shall apply even if the above-stated warranty fails of its essential purpose. Some states do not allow limitation or exclusion of liability for conse...