Xitel MD-PORT DG2 User Manual - page 4
7
6
Windows 2000
Once Windows 2000 starts and the appropriate drivers have been
loaded, the DG2 will automatically be set as your system's
preferred audio device. To verify this, open the Sounds and
Multimedia panel and make sure that USB Audio Device appears
in the Playback section under the Audio tab. To get to the
multimedia control panel hit Start, then go to Settings, then
Control Panel. The Sounds and Multimedia icon will be in the
Control Panel window. Double click on the icon. In the Audio tab,
make sure that USB Audio Device appears in the Sound Playback
section under Preferred Device. If it doesn't, use the scroll arrow
to the right and choose USB Audio Device. You're now fully
loaded.
Controlling the output and volume levels
The DG2's volume and output controls can be accessed by
double clicking the standard volume control icon. For most of
the DG2’s operations, the volume is set by the Wave Balance
slider. To activate the Wave Balance slider go to Options and
then Properties. In the bottom section of the Properties window,
make sure a check appears next to Wave Balance. Click OK once
you're done.
Installing MusicMatch Jukebox Plus
After the DG2's USB drivers have loaded, you will be ready to
start recording. The DG2 works with any Windows compatible
media player, although to help make things easy we've included
a full version of MusicMatch Jukebox Plus. This powerful software will let you quickly rip and encode tracks
from CDs, run customized playlists, and apply graphic equalization to all of your recordings. After
exhaustive testing, we definitely think MusicMatch is one of the best programs around for getting superior
results. To install MusicMatch Jukebox Plus please do the following:
1. Insert the MusicMatch Jukebox Plus CD into your CD-ROM drive.
2. When the MusicMatch Jukebox Plus splash screen opens, click on the option Install Jukebox Plus and
follow the onscreen instructions.
A users manual detailing how to use MusicMatch Jukebox Plus is contained on the CD. If you wish to view
the manual, simply insert the MusicMatch CD into your CD-ROM drive and select User's Guide. For further
information and news on software updates, please visit www.musicmatch.com.
Note: You don't have to run MusicMatch to use the DG2 - it will also work with any of your other favorite
players, including the Windows Media Player.
Note: when the DG2 is selected as your system's preferred audio device, no sound will come out of any
speakers plugged into your soundcard. If you wish to use your soundcard instead of the DG2, either unplug
the DG2 from the USB cable, or select your soundcard as preferred audio device in the Multimedia Properties
control panel for Windows 98, or Sounds and Multimedia control panel for Windows ME and Windows 2000.
It is not possible to use a soundcard and the DG2 at the same time.
Windows 98
Once Windows 98 starts and the appropriate drivers have
been loaded, the DG2 will automatically be set as your
system's preferred audio device. To verify this, open the
Multimedia Control Panel and make sure that USB Audio
Device appears in the
Sound Playback
section under
Preferred Device
. To get to the multimedia control panel hit
Start
, then go to
Settings
, then
Control Panel
. The
multimedia icon will be in the
Control Panel
window.
Double click on the icon to open the
Multimedia Properties
window. In the Audio tab, under the heading
Sound
Playback Preferred Device
, make sure that
USB Audio Device
appears. If it doesn't, use the scroll arrow to the right and
choose
USB Audio Device
. You're now fully loaded.
Note: Some computer systems ship with an OEM version of
Windows 98 that does not contain the entire generic USB driver and audio platform. If you cannot select
USB Audio Device in the Preferred Device Window, please refer to the troubleshooting section at the end of
this user manual for further instructions. In this situation you may not be able to select USB Audio Device
even though the USB drivers seemed to install fine when you first plugged in the DG2.
Windows ME
Once Windows ME starts and the appropriate drivers have been
loaded, the DG2 should automatically be set as your system's
preferred audio device. To verify this, open the Sounds and
Multimedia Properties control panel and make sure that USB
Audio Device appears in the Sound Playback section under
Preferred Device. To get to the Sounds and Multimedia
Properties control panel hit Start, then go to Settings, then
Control Panel. The multimedia icon will be in the Control Panel
window. Double click on the icon to open the Sounds and
Multimedia Properties window. In the Audio tab, under the
heading Sound Playback Preferred Device, make sure that USB
Audio Device appears. If it doesn't, use the scroll arrow to the
right and choose USB Audio Device. You're now fully loaded.
Controlling volume levels
Windows ME
Windows 98
Windows 2000
DG2 manual 30-4-01.xpress 24/5/01 11:59 AM Page 6