X380 detect quick start manual.
1 propeller hoop motor front indicator light (blue light) front direction propeller front indicator light (white light) battery compartment cover landing skids propeller hoop motor propeller led flight indicator landing skids tail indicator light (red light) tail direction.
2 x380 propeller usb socket fuselage abdominal data socket led flight indicator magnetic sensor configuration charger power adaptor battery camera frame wrench allen wrench 2.0 propeller usb data line.
3 quadcopter cf mode throttle trim throttle/direction direction trim stick mode take off/ landing lcd antenna return home elevator trim aileron/elevator aileron trim camera up/down photo power on/off.
4 basic flight operation before flying (front direction) the transmitter is mode 2 when it comes out from factory. Change mode1 to mode 2 by multi-function button on the transmitter. Mode 3 and mode 4 is useless. Quick start manual propeller installation before assembling the propellers, please take...
5 transmitter using cf mode and return home functions is on “0” position. Left/right stick is on the natural middle position. Turn on transmitter, indicator will be eternal on and lcd will be on as well, then your transmitter can be used normally. Binding the transmitter and the quadcopters have mad...
6 led flying indicator when put into the battery red and yellow light keep flashing half-safe flying red and green light keep flashing slowly no gps signal, or gps signal is less than 6 stars safe flying green light will be flashing slowly it has gps signal and more than 6 stars heading lock 2 green...
7 one key take off / one key landing x380 has one key take off and landing functions. You need to connect the battery with the quadcopter, wait till self test finishing. One key take off: press take off button for 2 seconds to start the motors rotating. Loose take off button, then it will climb 1m. ...
8 trim the magnetic sensor under the mode of heading lock, if there is any channel out of order,you need to re-trim the magnetic sensor. When you change the flying ground or take it far away from the flying ground for last time,we do recommend you re-trim your magnetic sensor. Magnetic sensor may be...
9 load the camera and the frame first of all,please fix the camera frame by using m3x6 inner hexagonal screw. Load the camera into the camera case and then fix it by using the self-spinning screw. Load the camera case into the camera frame by the self-spinning screw.Adjust the angle of the camera ac...
Email:sales@xk-innovations.Com shenzhen xk inoovations technology co., ltd..
