4 x250-28 x250-27.
All instructions, warranties and other collateral documents are subject to change at the sole discretion of our company. For the latest information please visit our company website www.Xk-innovations.Com read the entire instruction manual to become familiar with the features of the product before op...
The battery charger included with the x250 has been designed to safely charge the lipo battery. Caution: all instructions and warnings must be followed exactly. Mishandling of lipo batteries can result in fire, personal injury and/or property damage. 1. By handling, charging or using the included li...
Insert the battery into the quadcopter, the battery slides into the holder from the front to the back. Connect the battery up and place the quadcopter on a flat level surface. The x250 led’s will flash fast and then slow to a blink to show the quadcopter is ready bind to the handset. Making sure the...
If you are not familiar with the controls of the x250 please take a few minutes to familiarize yourself with them before attempting your first flight. Throttle elevator / pitch rudder / yaw aileron / roll basic flight instructions 1. Make sure the lipo battery is fully charged. 2. Insert the charged...
Motor socket motor socket led socket led socket strong vibrations on the quadcopter rotors damaged replace the main rotors quadcopter has problems with inconsistent left/right manoeuvres 1. Damaged rotor(s) 2. Damaged motor(s) 1. Check and replace any damaged rotor(s) 2. Check and replace and damage...
X250-01 xk250 lipo battery 780mah 3.7v x250-02 xk250 motors & gear (4) x250-03 xk250 screw set x250-04 xk250 bearing set (4) x250-05 xk250 aluminium motor shaft x250-06 xk250 main gear set (4) x250-07 xk250 pcb board x250-08 xk250 propeller set (4) x250-09 xk250 led lights x250-11 xk250 upper cover ...
