Warning: this manual contains important safety and operating information. Please read and follow the instructions in this manual. Failure to do so could result in personal injury or damage to your xmcommander or to your vehicle. User manual xm-rvr-fm-001.
Welcome thank you for purchasing an xmcommander satellite radio fm modulator and receiver system. Your xmcommander gives you access to over 100 xm satellite radio channels of music, news, and information.* your xmcommander must be used with the enclosed connecting devices to ensure maximum performan...
Getting started: activating xmcommander to quickly begin enjoying xm satellite radio, follow these simple steps: 1. Set up your xmcommander using the instructions in the installation guide or with the help of a professional installer. 2. Press the power button to turn the xmcommander on and verify t...
S e c t i o n 2 3 tuning wheel power button control keys number keys xmcommander controls figure 1. Xmcommander the xmcommander unit has a power button, two control buttons, tuning wheel, enter button and 10 number keys. Turns the xmcommander on or off. The display/menu button toggles between three ...
S e c t i o n 2 4 turns the xmcommander on or off. Highlights different channel/menu options on the screen. The enter button is used in selecting channels and menu options. Press and hold to activate tuneselect tm feature. Locates channels by various scanning methods. Switches between direct entry, ...
S e c t i o n 2 5 xmcommander display screen while tuned to an xm channel, the xmcommander default display contains information about that channel and the xmcommander settings. See figure 3. Your xmcommander display can be customized. See page 7. Display option 1 display option 2 display option 3 si...
Tune to a channel using tuning wheel tune up and down the channel list by turning the tuning wheel . Turn the tuning wheel one increment or decrement to progress through a list of channels. Continue to turn the wheel to scroll through the list and display a new channel with each increment. To select...
Basic operations select channel by category (remote control) on the remote control, press either of the category keys to enter category search. 1. Continue pressing one of the category keys until a category you are interested in appears. 2. Use the buttons to display a channel within the given categ...
Jump pressing on the remote causes the radio to revert to the last channel selected immediately prior to the current selection. A second press of returns you to the original channel played prior to initiating the jump process. With this feature, you can cycle back and forth between two channels. Sca...
S e c t i o n 5 9 warranty 1. Warranty statement - this express warranty is extended by terk technologies corporation, a new york corporation having its principal office at 63 mall drive, commack, ny 11725 ("terk") to the original end user purchaser. Terk warrants the xmcommander ("commander") to be...
S e c t i o n 5 10 if you see this on the display: no signal cause: the xm signal is being blocked. Antenna cause: antenna connector may not be securely seated. Cable may be damaged. Off air cause: the channel selected is not currently broadcasting. If this happens: you do not receive all xm channel...
Printed on recycled paper ©2003 xm satellite radio inc. All rights reserved. The xm name, and related logos are trademarks of xm satellite radio inc. Distributed by.
