XM Warrior G1SA Quick Start Manual - Cautions
Battery has no enough power or Memory card is fully filled.
6. Why the camera’s LED is red after power off?
Because remote control function is pending, you need to close remote
control function through short-pressing WiFi button.
7. How to reset to factory default setting?
Pressing reset button at back until hearing a voice.
Cautions
1. Do not leave the camera in places where the temperature may rise
significantly such as inside a car.
This may adversely affect the case or the parts inside.
2. The camera is a precision instrument. Do not drop, strike, or use
excessive force when handling the camera.
This may cause damage to the camera
3. Before you move the camera, disconnect USB cable.
Failure to do this may damage USB cable.
4. This is a sports action video product.
Please be careful when using the product, take care not to fall on the
camera as this may cause bodily injury.
5. There are no user serviceable parts for the camera: DO NOT
DISSASSEMBLE!
For repair, please call our customer services team for assistance.
6. Do not place the camera on unstable surfaces.
This may cause the camera to fall or tilt over, causing damage.