Summary of xpress xmc-10a
Page 1
Vehicle guide xmc-10a.
Page 2: Table of Contents
2 congratulations ......................................................................... 3 fcc information ........................................................................ 4 cautions and warnings ............................................................. 5 contents xmc-10a ...............
Page 3: Congratulations
3 congratulations congratulations thank you for purchasing the audiovox xpress xm ® satellite radio 2nd vehicle kit. You are one step closer to experiencing the latest innovation in xm satellite radio. Xm satellite radio will revolutionize your vehicle or in-home entertainment. Xm is america’s numbe...
Page 4: Fcc Information
4 fcc information please note that the power cable that has been supplied with your device is supplied with permanently attached ferrite beads at each end. It is the responsibility of the user to use the cable with the ferrite beads. The user is cautioned that changes or modifications not expressly ...
Page 5: Cautions and Warnings
5 cautions and warnings 1. Do not install the xmc-10a vehicle cradle in a position that hinders your view through the windshield, or obstructs viewing of the dashboard indicators and displays. 2. Do not install the unit where it may obstruct the operation or deployment of safety devices, such as air...
Page 6: Contents Xmc-10A
6 12 volt-to-5 volt dc power adapter 1 pc. Install manual antenna and antenna cable exit plug 1 pc. Cradle xmc-10a 1 pc. Xm sureconnect kit 1 pc. Cassette adapter 1pc. See xm sureconnect vehicle installation contents xmc-10a contents.
Page 7: Optional (Sold Separately)
7 optional (sold separately) fm direct adapter (p/n xmfm-1) accessory kit, mounting alcohol cleaning pad, surface cleaning pad, instruction sheet, swivel bracket. Audio cable (p/n sat-rca) contents xmc-10a (cont) contents.
Page 8
8 installation/wiring precautions 1. To prevent a short-circuit, be sure to turn off the ignition and remove the negative (-) battery cable prior to installation. Connect power wires last. 2. Do not install the unit in locations exposed to direct sunlight or, in areas subject to extreme temperatures...
Page 9: 1. Cabling Interconnections
9 setting up and installing your kit note: the xm signal can be received and processed virtually anywhere as long as there are no obvious satellite signal obstructions such as nearby buildings, high terrain, parking garages or tunnels. 1. Cabling interconnections you can begin to enjoy xm satellite ...
Page 10: Interconnect Diagram
10 interconnect diagram aux audio input to audio output of external playback device. This permits audio from an external device such as a portable cd player or mp3 player to be played through the xpress xm fm modulator . Note: 1. If the xmc-10a is installed using the optional xmfm-1 fm direct adapte...
Page 11: Interconnect Diagram (Cont)
11 xmc-10a cradle (rear view) xm antenna optional sat-rca audio cable (sold separately) (connect to auxiliary audio inputs on vehicle head unit.) optional fm direct adapter xmfm-1 (sold separately) to vehicle radio antenna jack xmc-10a cradle (right side view) interconnect diagram (cont) setting up ...
Page 12: Caution:
12 c. Using the alcohol swab supplied with your kit, clean the mounting surface and thoroughly wipe the area dry with a clean lint-free cloth. D. If the outside air temperature is cold, it may be beneficial to warm the adhesive backing on the bracket using a portable hair dryer, or by holding the ba...
Page 13: Setting Up and Installing Y
13 note: allow a 72-hour period for the adhesive backing to cure completely. E. Remove the plastic liner from the adhesive backing on the bracket, and fix the base in position on the surface; make sure the mounting pad is accurately positioned on the first try, since repositioning may be difficult, ...
Page 14: Setting Up and Installing Y
14 screw holes (2) for direct hard mounting plastic liner and adhesive backing swivel adjustment screw swivel bracket side (horizontal) mounting configuration vertical mounting configuration xmc-10a cradle assembly setting up and installing y our kit.
Page 15: Setting Up and Installing Y
15 4. Installing the xpress xm receiver into the cradle install the receiver as follows: a. After making sure the connectors and guide pin hole are properly lined up, gently lower the xpress xm receiver into the cradle and press down on the xpress xm receiver to mate the connectors together. The rai...
Page 16: Setting Up and Installing Y
16 cradle front view connector guide pin xmc-10a system connector xpress xm receiver system connector xpress xm receiver rear view raised detent receiver notch setting up and installing y our kit.
Page 17: 5. Connection Options
17 5. Connection options the xpress receiver and cradle provide an audio output signal in three ways: a. Fm modulator - when using the xmc-10a cradle with the fm modulator option, the xm audio signal can be received through your vehicle’s radio on selectable fm frequencies using the menu option incl...
Page 18: Setting Up and Installing Y
18 xm research and lab test results show that using a vehicle cassette adapter can best maximize the relationship between the best sound quality and ease of installation (see chart below). Optional sat-rca audio cable (sold separately) (connect to auxiliary audio inputs on vehicle head unit.) option...
Page 19: Setting Up and Installing Y
19 1 2 3 4 xpress cassette adapter installation. Installation is simple. 1.) plug the end jack (1) into the xm xpress car cradle’s audio output (2). 2.) insert the cassette adapter (3) in the vehicle’s in-dash cassette slot (4). Setting up and installing y our kit.
Page 20: 6. Installation Guidelines
20 keep excess cable under or behind the dashboard option 1 option 2 6. Installation guidelines step 1. First, determine the proper location for your xm satellite radio antenna based on the following criteria for your specific vehicle: a. You must locate the satellite radio antenna on the top of the...
Page 21: Setting Up and Installing Y
21 e. For option 2 and front mounting locations, route the cable along the door jam and into the vehicle as shown. Route the cable across the weather seal near the bottom of the door to reduce water leaks. C. Avoid kinking, crimping, twisting or chafing the cable. Use pre-existing wire channels when...
Page 22: Step 2.
22 be sure to choose a location carefully by taking notice of how doors and trunks open and close, as well as how seats move when they are adjusted so you can be certain there is ample clearance provided for the cables. Step 2. Once you have plugged the power and antenna jacks into the vehicle cradl...
Page 23: Notes
23 notes notes.
Page 24: 12 Month Limited Warranty
24 audiovox electronics corporation (the company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s...
Page 25: Warranty
25 the extent of the company's liability under this warranty is limited to the repair or replacement provided above and, in no event, shall the company's liability exceed the purchase price paid by purchaser for the product. This warranty is in lieu of all other express warranties or liabilities. An...
Page 26
128-7472k.