Summary of XM-7618
Page 1
Owner’s manual xm-7618 8/09 lat machine.
Page 2: Table Of Contents
Table of contents important safety information 3 before you start 4 assembly 5-12 parts list 13 exploded view 14 warranty information 15 2.
Page 3: Safety Precautions
Note: hand tighten bolts and nylon nuts until machine is fully assembled. Safety precautions safety information warning! Prior to assembly, remove components from the box and verify that all the listed parts were supplied. Before using this unit or starting any exercise program, consult your physici...
Page 4: Model:
Model: xm-7618 this manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact when calling please have the following product information available: model name : date mfg.: serial # model name decal location...
Page 5: Assembly
Assembly 5.
Page 6: Assembly
Assembly note: hand tighten bolts and nylon lock nuts until machine is fully assembled. Step 1 connect main base (#1) to the rear base (#2) using: • two m10*80 button head cap screw (#34) • four Φ11*Φ20*2 flat washer (#31) • two m10 nylon locknut (#37) attach two guide rods (#9) to the rear base (#2...
Page 7: Assembly
Assembly note: hand tighten bolts and nylon lock nuts until machine is fully assembled. Step 2 slide weight bumppers (#24) and slide weight support (#12) onto guide rods (#9) as shown. Connect upright (#3) to the main base (#1) using: • two m10*75 button head cap screw (#33) • four Φ11*Φ20*2 flat wa...
Page 8: Step 3
Step 3 slide top cross frame (#5) on top of guide rod (#9) and secure using: • two m10*25 button head cap screw (#36) • two Φ11*Φ20*2 flat washer (#31) attach top frame (#4) to the upright (#3) using: • two m10*75 button head cap screw (#33) • four Φ11*Φ20*2 flat washer (#31) • two m10 nylon locknut...
Page 9: Assembly
Assembly note: hand tighten bolts and nylon lock nuts until machine is fully assembled. Step 4 start by attaching the high pully cable (#15) to slide weight support (#12) using: • one 1/2"-12 jam nut (#44) attach one big pulley (#21) to the top frame (#4) using: • one m10*50 button head cap screw (#...
Page 10: Assembly
Assembly step 4 10
Page 11: Assembly
Assembly note: hand tighten bolts and nylon lock nuts until machine is fully assembled. Step 5 complete leg hold down assembly using: • one roller pad frame (#10) • two foam padding (#30) • two plastic washer (#42) • two metal end cap (#43) complete seat pad (#20) assembly using: • two seat pad tube...
Page 12: Assembly
Assembly note: wrench tighten above all bolts and nylon locknuts. Step 6 silde two adapters (#50) to the slide weight support (#12) and secure using: • two m8*6 screw (#49) for standard plate do not slide the adapters (#50) on, just using two spring clip (#56) hold the plate off from the slide weigh...
Page 13: Parts List
Xm-7618 parts list ref # part # description qty parts list 13 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 p00279 p00280 p00449 p00450 p00451 p00452 p00453 p00676 p00454 p00455 ...
Page 14: Exploded View
Exploded view 21 21 21 21 21 1 2 3 4 5 6 7 7 8 9 10 11 12 13 14 15 16 18 18 19 20 22 23 24 25 26 26 27 27 28 29 29 29 30 31 31 31 31 31 31 31 31 31 31 32 33 33 33 33 34 34 34 34 33 33 33 33 31 34 36 36 37 37 37 37 37 37 37 37 37 38 38 38 38 39 40 41 41 43 44 45 46 47 48 48 80 31 77 33 49 50 51 49 50...
Page 15: Xmark Fitness
Xmark fitness limited lifetime warranty this warranty applies only in the united states and canada to products manufactured or distributed by xmark fitness under the xmark fitness brand name. This product is backed by a lifetime warranty, excluding only expendable parts such as paint, finish and vin...
Page 16
Xmark fitness 7501 trammel drive shreveport, la 71108 customer service: 1-800-719-4605.