Summary of XM-7621
Page 1
Owner’s manual 8/09 xm-7621 power cage lat attachment.
Page 2: Table Of Contents
Table of contents important safety information before you start assembly parts list exploded view warranty information 2 5 - 11 14 3 4 12 13.
Page 3: Safety Precautions
Note: hand tighten bolts and nylon nuts until machine is fully assembled. Safety precautions safety information warning! Prior to assembly, remove components from the box and verify that all the listed parts were supplied. Before using this unit or starting any exercise program, consult your physici...
Page 4: Model:
Model: xm-7621 this manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact when calling please have the following product information available: model name : date mfg.: serial # model name decal location...
Page 5: Assembly
Assembly 5.
Page 6: Assembly
Assembly note: hand tighten bolts and nylon lock nuts until machine is fully assembled. Step 1 attach two adapter (#43) to the slide weight support (#5). Attach the guide rod (#7), slide weight support (#5) and two weight bumper (#16) to the rear base frame (#1) using: • two m10*25 button head cap s...
Page 7: Assembly
Assembly note: hand tighten bolts and nylon lock nuts until machine is fully assembled. Step 2 attach the lat bar hook (#4) to the top frame (#2) using: • one m10*65 button head cap screw (#30) • two Φ11*Φ20*2 flat washers (#35) • one m10 nylon lock nut (#36) 7 2 4 30 35 35 36.
Page 8: Assembly
Assembly note: hand tighten bolts and nylon lock nuts until machine is fully assembled. Step 3 attach the top frame (#2) to guide rod (#7) using: • two m10*25 button head cap screw (#27) • two Φ11*Φ20*2 flat washers (#35) attach the top frame (#2) to the power cage (xm-7620) using: • two m12*75 butt...
Page 9: Assembly
Assembly note: hand tighten bolts and nylon lock nuts until machine is fully assembled. Step 4 attach the rear base frame (#1) to the foot brace (#3) using: • two m12*110 button head cap screw (#32) • four Φ13*Φ26*2 flat washers (#34) • two m12 nylon lock nuts (#37) 9 32 37 34 34 34 34 3 1 2.
Page 10: Assembly
Assembly note: hand tighten bolts and nylon lock nuts until machine is fully assembled. Step 5 attach three big pulley 4.5" (#21) and high pulley cable (#10) to the top frame (#2) using: • one m10*50 button head cap screw (#29) • two m10*70 button head cap screw (#31) • six Φ11*Φ20*2 flat washers (#...
Page 11: Assembly
Assembly note: hand tighten bolts and nylon lock nuts until machine is fully assembled. Step 6 attach lower pulley cable (#11) to rear base frame (#1) using: • one m10*35 button head cap screw (#28) • two Φ11*Φ20*2 flat washers (#35) • one m10 nylon lock nut (#36) attach one big pulley 4.5" (#21) an...
Page 12: Parts List
Ref # part # description qty 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 43 44 45 1 1 1 1 1 2 2 1 1 1 1 2 1 1 4 2 4 4 4 2 6 4 2 4 4 1 4 1 4 1 2 2 2 8 20 8 4 1 1 2 1 2 1 1 p00495 p00496 p00497 p00676 p00005 p00534 p00498 p00686 p00...
Page 13: Exploded View
Exploded view 13.
Page 14: Xmark Fitness
Xmark fitness limited lifetime warranty this warranty applies only in the united states and canada to products manufactured or distributed by xmark fitness under the xmark fitness brand name. This product is backed by a lifetime warranty, excluding only expendable parts such as paint, finish and vin...
Page 15
Xmark fitness 7501 trammel drive shreveport, la 71108 customer service: 1-800-719-4605.