Summary of XM-7626
Page 1
Owner’s manual 8/09 xm-7626 functional trainer.
Page 2: Table Of Contents
Table of contents weight stack sticker placement 2 important safety information before you start assembly parts list exploded view warranty information 3 4 5-12 13 14 15 16.
Page 3: Safety Precautions
Note: hand tighten bolts and nylon nuts until machine is fully assembled. Safety precautions safety information warning! Prior to assembly, remove components from the box and verify that all the listed parts were supplied. Before using this unit or starting any exercise program, consult your physici...
Page 4: Model:
Model: xm-7626 this manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact when calling please have the following product information available: model name : date mfg.: serial # model name decal location...
Page 5: Assembly
Assembly 5.
Page 6: Assembly
Assembly note: hand tighten bolts and nylon lock nuts until machine is fully assembled. Step 1 connect the left frame(#1)and the right frame (#2) with two rear beam (#4) using: • four m10*80 button head cap screw (#55) • four m10*75 button head cap screw (#56) • sixteen Φ11*Φ20*2 flat washer (#60) •...
Page 7: Assembly
Assembly note: hand tighten bolts and nylon lock nuts until machine is fully assembled. Step 2 attach the main top beam (#3) to the left frame (#1) and the right frame (#2) using: • four m10*105 button head cap screw (#52) • eight Φ11*Φ20*2 flat washer (#60) • four m10 nylon lock nut (#64) 7.
Page 8: Assembly
Assembly note: hand tighten bolts and nylon lock nuts until machine is fully assembled. Step 3 attach: • two guide rod (#19) • two Φ62*Φ58*Φ25.2*25 weight bumper (#37) • five weight plate 15lb (#39) • nine weight plate 10lb (#40) • five weight plate 5lb (#41) • one top plate (#34) to the left frame ...
Page 9: Assembly
Assembly note: hand tighten bolts and nylon lock nuts until machine is fully assembled. Step 4 attach the left slip frame (#5) to the left slip tube (#13). Attach the left slip tube (#13) and the front support frame (#69) to the left frame (#1) using: • two m10*85 button head cap screw (#70) • one m...
Page 10: Assembly
Assembly note: hand tighten bolts and nylon lock nuts until machine is fully assembled. Step 5 attach one pulley cable (#8) to the left frame (#1). Attach two 4.5" pulley (#33) to the left frame (#1) using: • two m10*50 button head cap screw (#57) • four Φ11*Φ20*2 flat washer (#60) • two m10 nylon l...
Page 11: Assembly
Assembly note: wrench tighten bolts and nylon lock nuts. Step 6 attach four shroud bracket (#12) to the left frame (#1) using: • two m10*100 button head cap screw (#53) • four Φ11*Φ20*2 flat washer (#60) • two m10 nylon lock nut (#64) attach two weight shroud (#11) to the left frame (#1) using: • si...
Page 12: Assembly
Assembly tighten all hardware securely. You have completed the assembly of your new xm-7626. Congratulations! 12.
Page 13: 200 Lb Stack
Weight stack sticker placement 10 15 20 25 30 35 45 55 65 75 85 95 105 115 125 140 155 170 185 200 200 lb stack 13 the weight stack image below illustrates how the weight stack decals should be applied to the weight stack. Please note these decals should not be put on until the entire unit has been ...
Page 14: Parts List
Parts list 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 1 1 1 2 1 1 8 2 2 2 4 8 1 1 4 4 1 1 4 1 2 1 1 1 1 1 1 2 2 2 2 12 4 2 2 2 4 2 10...
Page 15: Exploded View
Exploded view 15.
Page 16: Xmark Fitness
Xmark fitness limited lifetime warranty this warranty applies only in the united states and canada to products manufactured or distributed by xmark fitness under the xmark fitness brand name. This product is backed by a lifetime warranty, excluding only expendable parts such as paint, finish and vin...
Page 17
Xmark fitness 7501 trammel drive shreveport, la 71108 customer service: 1-800-719-4605.