Xmod Electronics XBOX 360 Manual - Jitter Modes (Mode 3)
w
w
w
.x
m
od
el
ec
tro
ni
cs
.c
om
w
w
w
.x
m
od
el
ec
tro
ni
cs
.c
om
w
w
w
.x
m
od
el
ec
tro
ni
cs
.c
om
w
w
w
.x
m
od
el
ec
tro
ni
cs
.c
om
SPECIAL MODE - AUTO DROP AIM SHOT (DAS)
Just pushing the RT it will drops you all the way to the ground, aim and shoot, all in one action.
When you are aming with the LEFT TRIGGER it will shoot with a REGULAR Rapid Fire,
you will not drop.This allows you to aim and shoot from behind barriers.
To activate/deactivate the Auto Drop Aim Shot (DAS) with RAPID FIRE:
-Press & Hold the LEFT and RIGHT triggers at the same time and TAP the MODE button.
-Release the 3 buttons.
-The LEDs will stay solid waiting for your input. You will have 2 options:
Tap the Right Trigger to activate the DAS
Tap the MODE button to deactivate the DAS.
To activate/deactivate the Auto Drop Aim Shot (DAS) without RAPID FIRE (RF OFF):
-Press & Hold the MODE button for 3 sec.
-Release the button.
-The LEDs will stay solid waiting for your input. You will have 2 options:
Tap the Right Trigger to activate the DAS
Tap the MODE button to deactivate the DAS.
-You can CANCEL the DAS by pressing the LT+A+B buttons at the same
time when the Rapid Fire is OFF.
JITTER MODES (MODE 3)
-Tap the MODE button to change the Jitter sub-modes (Regular & Aim-Assisted).
-Press & Hold the MODE button for 2 seconds to change:
FAST JITTER (LEDs :1 blink)
SLOW JITTER (LEDS: 2 blinks)
AKIMBO-MIMIC (MODE 2)
To activate/deactivate the AKIMBO-JITTER: Press & Hold the MODE button for 2 sec.
BURST FIRE (MODE 4)
To change the Bust Speed: Hold the MODE button for 2 sec.
Fast (1 blink)
Slow (2 blinks)
The selected Burst setting will be works on the AKIMBO-BURST mode (mode 2)
ENABLE - DISABLE MODES
To enable or disable MAIN MODES (2-3-4-5-6):
-Turn the RAPID FIRE OFF.
-Press & Hold the B button for 8 seconds.
-Release the button when the LEDs light up. They will stay solid.
-Tap the MODE button to choose the main mode (2 to 6) you want to enable/disable.
-Tap the “A” button to enable the selected mode.
-Tap the “B” button to disable the selected mode.
-To SAVE & EXIT press & hold the LEFT Trigger and TAP the MODE button.
-The LEDs will flash for 2 sec.
FACTORY DEFAULT RESET
-Take the BATTERY PACK OUT.
-Press & Hold the MODE button and insert the Battery Pack.
-The LEDs will flash for 8 seconds