Multiuart com port demo quickstart guide rev a publication date: 2013/11/22 xmos © 2013, all rights reserved..
Multiuart com port demo quickstart guide 2/8 table of contents 1 multiuart com demo quickstart guide 3 1.1 host computer setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.2 hardware setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
1 multiuart com demo quickstart guide i n t h i s c h a p t e r · host computer setup · hardware setup · import and build the application · run the application · next steps this demonstration uses the xa-sk-uart-8 multiuart slicecard together with the xsoftip multiuart component to create 8 uarts. T...
Multiuart com port demo quickstart guide 4/8 · xa-sk-uart-8 slicecard · xa-sk-xtag2 · xtag-2 slicecard xp-skc-l16 slicekit core board has four slots with edge conectors: square , circle , triangle and star , and one chain connector marked with a cross . To setup up the system refer to the figure and...
Multiuart com port demo quickstart guide 5/8 1.2.2 setting up the system 1. Connect the xa-sk-muart slicecard to the xp-skc-l16 slicekit using the connector marked with square . 2. Connect the xtag-2 slicecard to slicekit core board, and connect xtag-2 to the adapter. Turn the xlink switch on the de...
Multiuart com port demo quickstart guide 6/8 figure 2: full system setup for multiuart demo 1.4 run the application 1. Open the configured terminal client application console on the host computer 2. Click on the run icon (the white arrow in the green circle) and wait for the application running mess...
Multiuart com port demo quickstart guide 7/8 selection). The uart will be reconfigured (xtimecomposer studio console will display the reconfigured value). The terminal console should be reopened with the new selected baud rate. Press h to display user menu. 6. Key in f in order to transfer a file th...
Multiuart com port demo quickstart guide 8/8 configuration via udp and a host of other features. This product can be accessed by applying to your xmos sales representative. 3. Examine the application code. In xtimecomposer studio navigate to the src directory under app_sk_muart_com_demo and double c...
