1 assembly manual xp125t motocross dirt bike ver. 44 2017-a-usa pit bike.
2 in order to ship xmotos vehicles as efficiently as possible, they are partially disassembled before crating. Since some of the most commonly removed parts have a direct bearing on a vehicle’s reliability and safety, conscientious assembly and preparation becomes extremely important. This assembly ...
3 xgroup corporation reserves the right to modify any equipment, technical specifications, colors, materials, services offered and rendered, and the like so as to adapt them to local conditions without previous announcement and without giving reasons, or to cancel any of the above items without subs...
4 clear a space about 10 ft. Square to give yourself plenty of space to work. place the crate upright on its base. Cut the straps and remove the cardboard cover. Cut away the plastic ties securing the front wheel to the crate and remove the wheel. Unfasten the top left and right brackets holding...
5 Ø cut away the plastic ties securing the gear shift lever and remove the lever. Ø cut away the left and right plastic ties securing the foot rests. Ø cut away the plastic ties securing the front axle bolt. Ø cut away the plastic ties securing the handle bar assembly. Uncrating opening crate.
6 assembly handlebar remove the two bolts from the front number plate bracket. Position the handlebars on top of the handlebar clamps and push the bolts through. Before tightening the clamp bolts, position the bracket under the top triple clamp as illustrated below and install the nuts and tighten t...
7 remove the two crate nuts and crate bolt in picture a and discard them. Cut the rear wheel steel tie to remove the motorcycle from the crate base. Support the motorcycle with a suitable stand to install the front fender, front wheel and the rear shock absorber. Discard the crate base. The front fe...
8 Ø remove the rear shock absorber nut and bolt Ø position the shock absorber in to the mounting bracket and fasten the nut. Assembly rear shock absorber note: rear shock bolt torque - 29-31 ft. Lbs..
9 Ø install the longer collar on the left side of the hub. Ø install the shorter collar on the right side of the hub. Ø loosely fit the axle in to the left side of the fork leg. Ø remove the plastic stopper from between the brake pads. Ø position the front wheel assembly between the fork legs. Ø tur...
10 install the gear shift lever on the left side of the gear shift shaft and tighten the bolt. Make sure to position the height of the lever with the bottom part of the foot rest so shifting will be easier. Install the fuel tank vent hose located inside the tool kit that came with the motorcycle. Ma...
11 notes.
12 xgroup corporation (xmotos) no.2 jinniu rd. Baiyang industrial zone wuyi city, zhejiang province, china book #: y87220584 ver. 44 2017-a-usa warranty thank you for purchasing the xp125t dirt bike. Your xp125t dirt bike is warranted against defects in material and workmanship for the period of one...
