1. DL manuals
  2. Xo
  3. Ventilation Hood
  4. XOC24SMUA
  5. User Instructions

Xo XOC24SMUA User Instructions - Installation Instructions

Summary of XOC24SMUA

  • Page 1

    Range hood - user instructions hotte de cuisine - notice d’utilisation campana extractora - manual de utilización usa f e xoc24smua xoc30smua xoc36s xoc30s need help? Call our ventilation experts toll free al 800-966-8300 avez-vous besoin d’aide ? Contactez nos experts au numéro gratuit 800-966-8300...

  • Page 2

    Proof of original purchase date and invoice is needed to obtain service under warranty. Limited 2 year warranty. For 2 years from the original date of purchase, we will provide, free of charge, parts and service labor in your home to repair or replace any part of the hood that fails because of a man...

  • Page 3: English

    - 3 - important safety instructions for residential use only read and save these instructions please read entire instructions before proceeding. Important: save these instructions for the local electrical inspectors use. Installer: please leave these instructions with this unit for the owner. Owner:...

  • Page 4

    - 4 - crepes suzette, cherries jubilee, peppercorn beef flambè ). C. Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter. D. Use proper pan size. Always use cookware appropriate for the size of the surface element. E. Keep fan, filters and grease laden surf...

  • Page 5

    - 5 - e. This unit must be grounded. Warning - to reduce the risk of fire, use only metal ductwork. Warning - under certain circumstances domestic appliances may be dan- gerous. A. Do not check filters with hood working. B. Do not touch the lamps after a prolonged use of the appliance. C. No food mu...

  • Page 6: Installa

    - 6 - installa tion p repar ation duct fittings: this hood must use an 6" round duct. It can transition to 3-1/4" x 10" or 3-1/4" x 12" duct. Use this chart to compu- te maximum permissible lengths for duct runs to outdoors. Note: do not exceed maxi- mum permissible equivalent lengths! Maximum duct ...

  • Page 7: Warning Fire Hazard

    - 7 - warning fire hazard never exhaust air or terminate duct work into spaces between walls, crawl spaces, ceiling, attics or garages. All exhaust must be ducted to the outside, unless using the recirculating option. Use single wall rigid metal ductwork only. Fasten all connections with sheet metal...

  • Page 8: D Sp

    - 8 - h oo d sp ecific ations › front of hood › side of hood › top of hood › mounting height and clearance: product dimensions and clearance xoc24smua - xoc30smua - xoc36s - xoc30s:.

  • Page 9: Installation Instructions

    - 9 - installation instructions installation - vented to the outside before proceeding with installation opera- tions, remove the anti-grease filters (fig.3) in order to make handling the device easier. This product can be installed in 3 different ways, depending on the model and on your requirement...

  • Page 10

    - 10 - 1. Fixing the hood to the lower part of the wall cabinet: follow the steps below: 1- position template b on the wall unit, bearing in mind the measurements indicated in fig. 1-2 and the minimum distance from the hob. - mark the references to fix brackets a to the wall unit, as indicated in fi...

  • Page 11

    - 11 - firmly reaches the wall unit (figure 4 - step 3.2). After any adjusting, tighten the bracket to the body (figure 4 - step 3.3). - fasten screw d to the wall unit as indicated in figure 4 - step 4. - once you have fastened the hood to the wall unit, adjust the spacer l, with the screws p, to m...

  • Page 12

    - 12 - 2. Installation of the hood on the lower part of the wall unit on the dividing panel. Follow the steps below: 1 -check the measurements indicated in fig.1-2 and the minimum distance from the hob, before installing the hood on the dividing panel. 3- make sure the thickness of the wall unit is ...

  • Page 13

    - 13 -.

  • Page 14

    - 14 -.

  • Page 15

    - 15 - 3. Installation of the hood on the lower part of the wall unit only for 30". This model includes side installation to the wall unit by using 2 brackets b (figure 6 besides steps 3-4, indicated in figure 4). 1- position template b on the wall unit, bearing in mind the measurements indicated in...

  • Page 16

    - 16 - - once you have fastened the hood to the wall unit, adjust the spacer l, with screws p, to make the device line up the rear wall unit (figure 4 - step 5). Important - the range hood must be secured to wall studs or use drywall anchors capable of supporting 75 lbs..

  • Page 17: Power Supply:

    - 17 - power supply: important – (please read carefully) warning: for personal safety, this appliance must be properly grounded. Remove house fuse or open circuit breaker before beginning installation. Do not use an extension cord or adapter plug with this appliance. Follow national electrical codes...

  • Page 18

    - 18 - 2. Connect electrical: • power supply connection: for connection to the power supply refer to the follows fig.7: black = l line white = n neutral green/yellow = g ground - a double-pole switch properly rated must be installed to provide the range hood power supply disconnection. - connect the...

  • Page 19

    - 19 - ductless recirculating option: carbon filter kit xoc24smua - xoc30smua - xoc36s - xoc30s : follow the indi- cations described in the additional sheet to install the kit..

  • Page 20

    - 20 -.

  • Page 21

    - 21 -.

  • Page 22: Use

    - 22 - use • if the apparatus is equipped with the following controls luminous: a = light b = off c = speed i d = speed ii e = speed iii f = automatic stop timer - 15 minutes (*) • the appliance has the intensive speed function, press key e for two seconds and it will be activated for 10 minutes aft...

  • Page 23: Maintenance

    - 23 - maintenance • we recommend that the cooker hood is switched on before any food is cooked. We also recommend that the appliance is left running for 15 minutes after the food is cooked, in order to thoroughly eliminate all contaminated air. The effective perfor- mance of the cooker hood depends...

  • Page 24

    - 24 - - do not use ordinary steel wool or steel brushes. Small bits of steel may adhere to the surface causing rust. - do not allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain in contact with stainless steel for extended periods. Many of these compounds contain chemical...

  • Page 25

    - 25 - • replacing halogen light bulbs: to replace the dichroic lamps, rotate the lamp anticlockwise by means of a suction cup as shown in figure. Replace the bulbs with new ones of the same type..

  • Page 26

    - 26 - xoc24smua - xoc30smua - xoc36s - xoc30s :.

  • Page 27: Options and Accessories:

    - 27 - options and accessories: model xorfrnd ductless recirculating filter kit. Model xorfk12 ductless recirculating filter kit..

  • Page 28: Installation Preparation:

    - 28 - installation preparation: check installation hardware: locate the hardware package packed with the hood and check contents. Adjusting brackets aluminum filter type description n° a 1/8" x 1/4" 3 b 3/16" x 9/16" 4 supply of side fixing brackets on wall unit only for 30" 1/8" x 1/4" n°4 side fi...

  • Page 29: Xoc Spec Sheet

    - 29 - xoc spec sheet model: xoc24smua - xoc30smua - xoc36s - xoc30s sizes: 24" - 30" - 36" depth: 11-1/16" features and benefits: model: xoc24smua - xoc30smua - 395 cfm high velocity blower optimally removes smoke, grease and odors. - 3 speed electronic illuminated controls. Model: xoc36s - xoc30s ...