Xomax XM-RSU221BT User Manual - page 10
10
XOMAX
XM-RSU221BT
DE
Topic:
Introduction
8
MIC Bluetooth microphone
The microphone is used during hand-free
phone calling via Bluetooth. The microphone
should not be blocked to achieve the best
possible sound quality.
9
Rotary button
rotate
Change the loudness
Rotate the button clockwise to boost the
loudness and reverse to reduce the loudness.
press
Audio settings / RDS functions
Press the button several times to switch
between following options: AUTO (LED lights
settings), Bass, Treble, Balance, Fader,
Loudness, Equalizer, Stereo and Volume;
RDS (AF, TA, PTY etc.)
Within the selected option rotate the button to
maximaze/minimize corresponding factor.
Please note that some functions may be
inavailable in your country.
A
Display
Additional information
The right display exhibits additional
mode information and the EQ graphics.
B
BND/
[BAND] in radio mode: to switch between
frequency bands: FM1, FM2, FM3, AM1 and AM2
[Telephone] to accept/start a call.
C
SD
micro SD slot
The micro SD card slot is added for reading of
micro SD-, micro-SDHC and micro SDXC-cards
in following formats only: FAT32- or exFat- file
system. Maximal supported volume: 32 GB.
D
USB
USB plug
The USB plug is added for reading of USB flash
drives in following formats only: FAT32- or
exFat- file system. Maximal supported volume:
32 GB.
other USB devices such as an external
harddisc can not be supported.
E
AUX IN
Auxiliary audio input
3,5 mm jack plug for connection with an
external playback device such as MP3 player,
smarthone, tablet PC etc.
F
RST
Reset
Back to factory settings.
G
LOUD
Loudness function
Press the
LOUD
button to (de-)activate
the function.
H
IR
infrared receiver
The IR receiver picks up the infrared signal
from the remote control. Please make sure that
the IR receiver is not blocked
!